How the fast bits from the F1 movie were shot on a custom built iPhone camera
Unless you've been living under a rock, you've no doubt heard about F1: The Movie. It's one of the most anticipated movies of 2025. But what you might not know, is that Apple is behind the film. It's an Apple TV movie which is heading to cinemas first. But Apple didn't just fund the movie and offer a platform for you to stream it – it actually helped to film it.
Apple actually built a customer camera for Formula 1 cars to use during filming. This wasn't Tim Cook rocking up to set with an iPhone taped to a steering wheel. The tech giant built a bespoke bit of kit from the inside out using iPhone parts.
Read more: Apple Maps free update brings Monaco to life for F1 fans
How Apple built a custom F1 car camera with iPhone parts
The upcoming F1 film from Apple, starring Brad Pitt and directed by Joseph Kosinski (behind Top Gun: Maverick), wanted to put the viewer right in the cockpit. Problem is, F1 cars are aerodynamic nightmares for anything bulkier than a bolt. You can't slap a Hollywood-grade cinema camera on one and expect it not to fly off. Or melt. While the standard broadcast cameras F1 already uses are great for telly, it turns out that they're absolutely dire for cinema.
So Apple's solution was to tear an iPhone apart and build a camera that fits in the same spot as existing F1 broadcast units. Wired got the behind-the-scenes look at this camera tech, which is some seriously impressive gear. The firm took the 48MP sensor from the iPhone 15 Pro Max and put it inside a module (most likely) powered an A17 Pro chip.
Let's be clear, this wasn't smartphone shoot. An iPhone didn't film this footage. It's a purpose-built device encased in a shell that looks just like the original F1 camera. It complies with weight and design rules so could be used on the cars on track. But the fact that it's the same camera sensor as an iPhone that slips into your pocket is seriously impressive.
Shock-proof, heat-proof, and strong enough to survive the kind of g-forces that would make the average DSLR weep, the module was tested beyond even what Formula 1 requires. The footage, captured in ProRes Log, is fully gradeable for editors. That Log format, and support for the professional ACES colour pipeline, both showed up later as an iPhone feature. Coincidence? I think not. Turns out this secret little movie project has been influencing the iPhone's feature set from behind the curtain.
As for controls, F1 cars aren't allowed to have onboard wireless systems, because the FIA apparently doesn't fancy seeing a camera take off mid-race. So the whole setup had to be wired. To work with this, Apple designed an iPad control panel that let the filmmakers tweak ISO, shutter angle, frame rate, and more via USB-C. Very un-Hollywood, but very Apple.
The high-speed shots it enabled are scattered throughout the movie. Apparently there's no 'shot on iPhone' tag in sight, so you'll just have to keep your eyes peeled for the magic. F1: The Movie hits international cinemas and IMAX theatres on 25 June, with a US release two days later on 27 June. Prepare for noise, speed, and the most expensive use of an iPhone camera sensor to date.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Stuff.tv
a day ago
- Stuff.tv
How the fast bits from the F1 movie were shot on a custom built iPhone camera
Unless you've been living under a rock, you've no doubt heard about F1: The Movie. It's one of the most anticipated movies of 2025. But what you might not know, is that Apple is behind the film. It's an Apple TV movie which is heading to cinemas first. But Apple didn't just fund the movie and offer a platform for you to stream it – it actually helped to film it. Apple actually built a customer camera for Formula 1 cars to use during filming. This wasn't Tim Cook rocking up to set with an iPhone taped to a steering wheel. The tech giant built a bespoke bit of kit from the inside out using iPhone parts. Read more: Apple Maps free update brings Monaco to life for F1 fans How Apple built a custom F1 car camera with iPhone parts The upcoming F1 film from Apple, starring Brad Pitt and directed by Joseph Kosinski (behind Top Gun: Maverick), wanted to put the viewer right in the cockpit. Problem is, F1 cars are aerodynamic nightmares for anything bulkier than a bolt. You can't slap a Hollywood-grade cinema camera on one and expect it not to fly off. Or melt. While the standard broadcast cameras F1 already uses are great for telly, it turns out that they're absolutely dire for cinema. So Apple's solution was to tear an iPhone apart and build a camera that fits in the same spot as existing F1 broadcast units. Wired got the behind-the-scenes look at this camera tech, which is some seriously impressive gear. The firm took the 48MP sensor from the iPhone 15 Pro Max and put it inside a module (most likely) powered an A17 Pro chip. Let's be clear, this wasn't smartphone shoot. An iPhone didn't film this footage. It's a purpose-built device encased in a shell that looks just like the original F1 camera. It complies with weight and design rules so could be used on the cars on track. But the fact that it's the same camera sensor as an iPhone that slips into your pocket is seriously impressive. Shock-proof, heat-proof, and strong enough to survive the kind of g-forces that would make the average DSLR weep, the module was tested beyond even what Formula 1 requires. The footage, captured in ProRes Log, is fully gradeable for editors. That Log format, and support for the professional ACES colour pipeline, both showed up later as an iPhone feature. Coincidence? I think not. Turns out this secret little movie project has been influencing the iPhone's feature set from behind the curtain. As for controls, F1 cars aren't allowed to have onboard wireless systems, because the FIA apparently doesn't fancy seeing a camera take off mid-race. So the whole setup had to be wired. To work with this, Apple designed an iPad control panel that let the filmmakers tweak ISO, shutter angle, frame rate, and more via USB-C. Very un-Hollywood, but very Apple. The high-speed shots it enabled are scattered throughout the movie. Apparently there's no 'shot on iPhone' tag in sight, so you'll just have to keep your eyes peeled for the magic. F1: The Movie hits international cinemas and IMAX theatres on 25 June, with a US release two days later on 27 June. Prepare for noise, speed, and the most expensive use of an iPhone camera sensor to date.
Stuff.tv
a day ago
- Stuff.tv
Satechi FindAll Glasses Case makes your specs almost impossible to lose
Apple's Find My network can be a godsend if your iPhone or AirPods go walkabout – and now the Satechi FindAll Glasses Case has come along to make your specs harder to lose too. Made from vegan leather (AKA not leather at all), the Satechi FindAll Glasses Case has Bluetooth 5.4 LE onboard, so once you've added it to your Find My app you'll be able to use your phone to track the case down when you can't remember where you put it. There's no ultra-wideband onboard, so it won't be as accurate as Apple's AirTags, but it should still help you narrow down the search to the point that you can trigger the 80dB SOS chime and use your ears to locate it. That'll also go off as a 'don't forget me!' alarm if you leave it behind anywhere. The 150mAh battery inside should last up to eight months and it supports wireless charging (both Qi and Qi2). If you have a MagSafe charger you can also stick it to that. Shaped like a Toblerone to ensure it's compatible with as many pairs of glasses as possible, including Ray-Ban Meta's AI pairs and those slightly odd 'extended reality' ones, you can choose from three colours: black, sand and desert rose. When your glasses aren't inside, it also folds down flat to make it easier to carry around. The case will set you back £40/$50 and Satechi's FindAll range also includes a luggage tag, a keychain, and a Tile-style card for slipping into your wallet.
Stuff.tv
a day ago
- Stuff.tv
Garmin Venu X1 is an Apple Watch Ultra for your Android phone
If you've always liked the look of an Apple Watch Ultra smartwatch but don't own an iPhone to pair it with, the Garmin Venu X1 could just be the next best thing. Compatible with both iOS and Android, the Garmin Venu X1 has a 2in scratch-resistant display (Garmin's biggest) and is housed in an 8mm titanium case (Garmin's thinnest) that's waterproof down to about 50m. The screen's 448×486 resolution should be ideal for showing its full-colour maps, whether you're navigating your way to the top of a mountain or just to the closest Lidl. It'll also show you things like your real-time heart rate, SPO2, and Body Battery, which is Garmin's way of working out how much energy you have, so you'll know whether you're ready to embark on one of the 100+ activities that it's capable of tracking. It'll also show notifications from your phone, so you'll have no excuse for missing that text reminding you to pick up some knock-off Monster Munch, and with support for Garmin Pay onboard you can tap it at the checkout too. The watch has a built-in speaker and microphone so you can use it for calls if you've got your hands full with shopping, plus there's also support for voice control. And if it's dark by the time you get home, there's even a built-in torch to help you navigate your way safely to the front door. How long the battery will last depends on which features you have turned on, but it'll do eight days in smartwatch mode, although that drops significantly to two days if you have the display in always-on mode. Use the GPS for any length of time and it'll fall to as little as seven hours if you also have music playing. Not all of its features are available when using the Venu X1 with iOS; you can't reply to texts from your wrist or view photo messages on the watch's screen, but that's still much more than an Apple Watch will do with an Android phone. The Garmin Venu X1 is available in two colours – black or moss with matching nylon straps – and it'll set you back £680/$800.
