Can somebody let this robot down?
It's not clear that anyone was asking for a company to build a muscular, sinewy robot or to see a video of it dangling, helpless from a hook, but life is full of surprises and this YouTube video of Clone Robotics' "Protoclone" is here all the same.
The Protoclone appears to be a prototype version of the "Clone" robot the aptly named Clone Robotics is working to build. The video shows the Protoclone flexing its arms and legs, with visible artificial muscle fibers moving underneath its white "skin." Based on Clone Robotic's video description, the impressive part here is that fact that the Protoclone has "over 200 degrees of freedom, over 1,000 Myofibers, and over 200 sensors," and also that the robot is "faceless," for some reason.
The end goal for the startup is to build an android that's anatomically correct, with synthetic nervous, skeletal, muscular and vascular systems powering its movement. The "Myofibers" included in the Protoclone are a custom Clone Robotics creation with "the desirable qualities of mammalian skeletal muscle." For the eventual Clone robot's purposes, those qualities are the ability to "respond in less than 50 ms with a bigger than 30 percent unloaded contraction" and "at least a kilogram of contraction force for a single, three gram muscle fiber," according to Clone Robotics' website.
That the Protoclone is dangling in the video rather than roaming around of its own accord is a reflection of its prototype nature. Robots are often hung or propped up with a support arm until they can support their own body weight, something that can be hard to achieve without all of the right materials.
Clone Robotics is not unique in pursuing a human-like robot that could theoretically replace human workers. Figure is exploring a similar idea, minus the muscles. Tesla started off on the wrong foot with a person in a spandex suit, but it's serious about robots, too. Even the largest of tech companies have turned their attention to robots: Both Meta and Apple are reportedly exploring robotics as a future product category. It's fair to say Clone Robotics is winning when it comes to posting videos of muscular robots, though.
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Gizmodo
4 hours ago
- Gizmodo
Say Goodbye to YouTube Ads Forever: Here's the VPN Trick You Need
Without YouTube Premium, you're doomed to watch ads every few minutes, sometimes more often. If you're exhausted by head-spinning ads, consider purchasing a YouTube Premium subscription. Sensible, right? Well, not for everyone. YouTube Premium's recent price increases made it unaffordable for many. People online have found a simpler way to block YouTube ads. You wouldn't believe it, but these two VPNs make YouTube ads vanish in seconds! NordVPN and Surfshark are renowned for their reliability. They provide exceptional privacy, streaming prowess, and compatibility with all devices. While both VPNs include ad blockers, they've become ineffective in blocking YouTube ads. Well, that's what most people thought. Namely, when you use NordVPN or Surfshark and connect to a server in Albania, YouTube ads suddenly disappear. Having tested the trick, we realised it's true. You may be wondering how this works. Avoid YouTube Ads With NordVPN As many people there have reported, YouTube doesn't display ads in Albania. Simultaneously, NordVPN and Surfshark work like all other VPNs. They allow you to connect to a remote server and use its IP address. Given these VPNs' strong presence in Albania, connecting to an associated server is a breeze. With the Albanian IP address, users can overcome YouTube ads and enjoy an experience similar to what YouTube Premium provides. Things like adding videos to the queue and playing videos with the screen off aren't there. At least, you won't notice any ads, allowing for uninterrupted entertainment on all devices. While YouTube is a big part of our lives, splurging on a VPN gives you much more. Watching YouTube without ads is just a speck in the universe of possibilities. One of them is very popular, and it's bypassing geo-blocks. NordVPN and Surfshark are particularly effective at streaming and unblocking many websites. They offer over 100 locations globally, with modern 10 Gbps servers and fast protocols to enable industry-leading speeds. Many people latch onto torrenting as a perk. Both VPNs are equipped with optimised servers for P2P. In addition, they provide MultiHop (Double VPN) capabilities for double the encryption and more security and privacy. All-around VPNs like these are fantastic for gaming, and you can even enable them on public WiFi networks for added protection. If you're an avid traveller, more privacy and ad-free YouTube enjoyment sounds exciting. No bandwidth limits mean endless possibilities, but more importantly, you don't need wealth to get them. NordVPN and Surfshark cost pennies these days, so you don't have to ditch your summer vacation for their subscriptions. Try Surfshark risk-free today
Tom's Guide
15 hours ago
- Tom's Guide
7 Apple TV 4K settings to change now for the best results
The Apple TV 4K is one of the best streaming devices, and it just got a big update at WWDC that will take tvOS to new heights. As much as we like it, however, it's still not a perfect system right out of the box. There are a few settings you might want to consider changing for optimal performance. Luckily, Apple has made it pretty easy to sift through the settings on this device, with many of the options we need right in the Video and Audio section. Here's which ones you need to change, and which ones you can leave alone. Let's start with the most obvious setting: Video Format. This might surprise you, but I usually recommend setting this to 4K SDR. Once this is set properly, you don't have to see that annoying black flash when content switches from SDR to HDR formats. It's pretty prevalent on YouTube and other platforms, and it might make you think there's a problem with the device. Thus, it's best to keep the main video format to 4K SDR (or 1080p SDR if you aren't using a 4K TV). This won't diminish quality by any means. In fact, it could make menus and other content that's being force-converted into HDR look a little better. Chroma subsampling refers to the way color is transmitted via compressed video data, and in the case of the Apple TV 4K, you have a couple options to choose from depending on the TV that you're using. Get instant access to breaking news, the hottest reviews, great deals and helpful tips. Chroma 4:4:4 is the way to go if your TV supports it and if you're using an applicable HDMI cable. Switching to 4:4:4 essentially gives you access to the full color array and will make menus a bit more vibrant. You'd be hard-pressed to see any noticeable changes in general content, though. You also might have to change your HDR settings first before you can get the full benefits of any chroma tweaks (and this setting will revert back to 4:2:0 if you adjust video output at all). Unfortunately, my TV only supports Chroma 4:2:2, but it's better than 4:2:0 — even if the latter is largely favored for its increased reliability. If you do run into any signal failures, like flickering or black screens, you can always switch back to 4:2:0, which I'd recommend if you're using an overly long HDMI cable or one of the best projectors. The HDMI setting on the Apple TV 4K controls the color space in digital video content, which goes hand-in-hand with chroma and brightness. There's really no need to change this setting unless it's not already set to YCbCr. You will have three total options to choose from, including RGB High, RGB Low, and the aforementioned YCbCr. The latter is your best bet to obtain the best possible performance on the Apple TV 4K, whereas RGB might be better if you were running a different type of device. You could also consider RGB High or Low if you were using one of the best monitors with your Apple TV 4K, but I'm not sure there's a huge audience for that. There are also some TVs that might look slightly better with RGB enabled, but for our purposes we're going to stick with YCbCr. Right below the chroma setting you'll find the "Match Content" setting, which will allow the Apple TV 4K to automatically switch from SDR to HDR and from 24Hz to 30Hz depending on what's playing on the screen. Thus, you'll want to enable both Range and Frame Rate. Once enabled, you don't have to worry if your device is setup correctly for when a Dolby Vision movie is playing at 24Hz. The Apple TV 4K will simply set itself to the right settings to get that crisp cinematic feel without any extra fiddling on your part. "Range" in this case not only refers to HDR, but also other factors like motion clarity. It largely depends on the content you're watching, but it's highly recommended to change this right out of the box. At the bottom of the Video and Audio section, you'll find all the audio settings we need to change. From here, you can set it so that your audio output will play from other connected speakers if you'd like, or just rely on the TV speakers if you'd prefer that. You can also check to see if your TV has any surround sound functionality built into it under the Audio Format section. Given that the Samsung S90D OLED TV I'm using has Dolby Atmos support, it's listed among available formats, but most users should just leave it set to Auto. There are also a few other notable settings here that you could tweak, like Enhance Dialogue and Reduce Loud Sounds. As their names suggest, they amplify and diminish certain audio cues to make audio sound slightly better. I'd recommend Enhance Dialogue above all else, but this comes down to user preference. Lastly, I recommend turning off Navigation Clicks. It doesn't offer too much aside from noisy feedback when you move about the menus. One extra setting I would change is the clickpad functionality. This is another preference thing, so don't feel it's an obligation. Still, this can get pretty annoying — most especially if you have Navigation Clicks enabled in the Audio tab. Better to just keep it to Clicks Only as it just makes navigation so much more fluid. While you're here, you can also change the TV Button to the Home Screen if you'd prefer that over jumping into Apple TV Plus. It would be cool if Apple let you set this to any application, but makes sense it's just Home or Apple TV Plus in this case. Also scroll to the bottom and turn on the CEC functionality, which is titled as just "Control TVs and Receivers." This allows you to use a single remote instead of two so you're not stuck rummaging for multiple remotes when it's time for a movie or show. Last but not least, there are a few settings in the General section that you may want to consider changing. A big one is the appearance. I immediately changed this to Dark Mode, which I find to be easier on my eyes, but you might prefer it in the Light setting. You can also adjust how long it takes before the Apple TV goes into sleep mode. It's set to 15 minutes on default, but this can be as short as 5 minutes or as long as 4 hours. You could set it to "Never" so the Apple TV never goes to sleep, but your energy bill might not be too happy. In General, you'll also find some notable Privacy settings: Although the Apple TV 4K is still the best streaming box when it comes to privacy, a couple settings are important here, like Share Apple TV analytics, Improve Siri & Dictation, and Location services. You could turn these off you'd prefer, but they do help Apple improve its products. Make sure you enable "Allow Apple to Ask to Track" in the "Track" setting. This ensures apps must ask you to track data after they're installed, making it harder for certain brands to use your data against you. You can go down the list and see which apps are using data from various features, like Bluetooth, Photos, Microphone, and Camera. It's a good habit to keep an eye on this, especially if you have kids who might not be so inclined to read want they're opting into at any given moment.
Tom's Guide
17 hours ago
- Tom's Guide
I let AI summarize every PDF I read — 6 prompts that saved me hours
I have had to read so many PDFs for work. This can end up taking hours of your day, searching through documents for nuggets of information or one key figure buried near the end. However, I have now been using ChatGPT for a while to help me with this. The chatbot can become your best friend when it comes to PDFs, working through wealths of information to give you the answers you need. These six prompts are all you'll ever need to use with ChatGPT for your next PDF scroll. Using the prompt 'Summarize this PDF' is a lifesaver for long documents. Instead of having to work your way through 30-odd pages of text, this prompt will offer up a summary of all of the key details. This will give a quick overview, as well as picking out key bits of information. For example, on research papers, this prompt can layout the findings, methodology and key bits of information in one easy list. This also works for non-PDF documents. Try uploading a YouTube video or news story and using the same prompt to condense large amounts of information into an easy-to-digest system. Sometimes you'll be working through so many PDFs in one go, quickly scimming through each one to just find out a few key points. Skip this step by asking ChatGPT to 'Pick out the key points in this PDF'. Get instant access to breaking news, the hottest reviews, great deals and helpful tips. Similar to the prompt above, this will work through the document, offering some bullet points on the most important parts of the document. This will often include facts and figures, findings or an overall objective from the PDF. This can also be expanded to ask the same question but on specific chapters of a noticeably long PDF. This is an especially useful prompt for PDFs that feature a lot of quotes. Whether its for a research paper you're working on or if you're trying to find quotes to support a marketing plan, this can scan through a whole PDF looking for quotes. More importantly, if there is a ridiculous amount of text to work through, you can use this prompt more specifically. For example, 'Find quotes that are positive about the product from people in senior positions'. You can also ask ChatGPT where these quotes come from so you can go back and confirm all of the wording and attribution is correct. A prompt that can be a little hit and miss. "Extract all figures, tables and charts, explaining each" will do as it says. However, this is reliant on all of these tables and figures being readable to ChatGPT. If there is a table that has been photocopied or is in a particularly confusing infographic, it could be easily missed. However, in my time using this prompt, I have rarely seen it make a mistake. You can also ask ChatGPT to take the information and put it into tables of your own or compile all of the information gathered into one document. Why limit yourself to just the PDF you're reading? Ask ChatGPT to examine the internet for supporting articles and ChatGPT will provide a document of supporting content. Along with condensing all of this information into the chat, it will also provide links to important sources to follow up on. It is crucial to double check any information that comes from this. Because you are asking ChatGPT to directly check the internet and compare it to a PDF, it can cause some hallucinations in the crossover. A lot of the prompts above will extract information from a PDF, but they will do so in bullet points and summarized phrases. This one on the other hand will create a written report explaining everything that is in there. Simply ask ChatGPT to 'explain the PDF to me.' You can add extra information such as explaining it in simple terms or explaining it for someone focused on marketing to pick up key details. I have found a lot of success with the prompt 'Read through the PDF and become an expert in it. Then, explain it to me as an expert on the information.' This takes away the conversational tone and focuses on the importance of the information.
