logo
CMR in MINOCA Linked to Improved Diagnosis and Management

CMR in MINOCA Linked to Improved Diagnosis and Management

Medscape5 hours ago

TOPLINE:
In a prospective study of over 300 patients with myocardial infarction with nonobstructive coronary arteries (MINOCA), cardiovascular magnetic resonance (CMR) was associated with meaningful changes in clinical diagnosis and/or management in 63% of patients and a similar increase in diagnostic certainty.
METHODOLOGY:
Previous CMR studies in MINOCA have focused on radiologic yield — a limited metric that does not reflect real‐world clinical utility. Prospective data on patient care are lacking.
This prospective study conducted in Australia and the UK assessed the impact of CMR on diagnosis and management in 320 patients with MINOCA (mean age, 55.6 years; 52% men) recruited between January 2019 and July 2023.
Patients were included if they had a hospital admission with acute features consistent with the Fourth Universal Definition of Myocardial Infarction, no obstructive coronary artery disease on angiography, and a clinician assessment indicating acute myocardial infarction as the most likely presentation.
The treating cardiologists completed a questionnaire before and after CMR to record their working diagnosis, rate diagnostic certainty on a 1-10 scale (10 = most certain), and specify intended management, including medications and follow-up testing.
The primary endpoint was a composite of change in clinical diagnosis or management after CMR.
TAKEAWAY:
CMR was associated with a change in diagnosis or management in 63% of patients (P < .001), with diagnosis revised in 38% and management changed in 50%.
Diagnostic certainty increased significantly from a median score of 6-8 after CMR (P < .001), and diagnostic confidence numerically increased in 63% of patients.
The absence of coronary atheroma, a pre-CMR diagnostic certainty score ≤ 5, and early CMR (performed within 14 days of hospital presentation) independently predicted a change in diagnosis or management, with 80% of patients with all three predictors vs 40% of those with none meeting the primary outcome.
Of 172 patients initially prescribed dual antiplatelet therapy, 66 (38%) had it deprescribed following CMR, yielding a number needed to test of 3.
IN PRACTICE:
'Integration of CMR into diagnostic imaging pathways may be reasonable to augment clinical diagnosis and management; however, further cost-effectiveness analyses are now warranted,' the study authors wrote.
SOURCE:
This study was led by Adil Rajwani, PhD, of the Royal Perth Hospital, Perth, Australia. It was published online on June 13, 2025, in Heart.
LIMITATIONS:
The study was limited by the impracticality of conducting a bias-free randomized trial of CMR vs no CMR. It was also limited by the assessment of CMR's impact only immediately after imaging, potentially missing later clinical insights. Medication protocols were not standardized, and the limited use of additional diagnostics such as optical coherence tomography may have influenced the findings.
DISCLOSURES:
This study was funded by a grant from the Royal Perth Hospital Medical Research Foundation in Australia. The authors declared having no conflicts of interest.
This article was created using several editorial tools, including AI, as part of the process. Human editors reviewed this content before publication.

Orange background

Try Our AI Features

Explore what Daily8 AI can do for you:

Comments

No comments yet...

Related Articles

Nobel Biocare and 3Shape Announce Strategic Distribution Partnership
Nobel Biocare and 3Shape Announce Strategic Distribution Partnership

Yahoo

time12 minutes ago

  • Yahoo

Nobel Biocare and 3Shape Announce Strategic Distribution Partnership

Nobel Biocare to Distribute 3Shape TRIOS® Intraoral Scanners ZURICH, June 23, 2025 /PRNewswire/ -- Nobel Biocare is pleased to announce a new distribution partnership with 3Shape, a global leader in 3D scanning and digital dental solutions. Through this collaboration, Nobel Biocare will become an official distributor of 3Shape's TRIOS® intraoral scanners, expanding its digital dentistry portfolio and delivering even greater value to dental professionals worldwide. 3Shape's TRIOS® scanners are widely recognized for their accuracy, ease of use, and patient-friendly scanning experience. This distribution agreement brings together 3Shape's innovative scanning technology with Nobel Biocare's trusted heritage in implant-based restorations and prosthetics, offering customers a streamlined digital workflow from scan to final restoration. At the same time, we would like to emphasize that the DEXIS IS scanner remains a core element of our offering — an enduring symbol of our strong and strategic partnership with DEXIS. This dual approach not only enhances the range of cutting-edge tools available to dental professionals but also reaffirms our pledge to quality care and innovation, instilling confidence among our customers and key stakeholders, including our valued Envista investors. "At Nobel Biocare, our mission is to redefine what is possible in Dental care by empowering clinicians through innovation" said Rosemary O'Neill, VP/GM Procera and Digital Solutions "By partnering with 3Shape and distributing TRIOS scanners, we're enabling our customers to access one of the most advanced intraoral scanning solutions available, supported by Nobel Biocare's expertise and service network." Key benefits of the partnership include: Seamless integration of TRIOS scanners with Nobel Biocare's digital workflows Bringing together two premium brands to deliver treatment efficiencies, predictability and reduced time to teeth - transforming patients lives through our superior products and solutions Access to world-class training and educational resources to ensure clinical success "We are excited to collaborate with Nobel Biocare to expand access to TRIOS," said John Cusack, Chief Commercial Officer at 3Shape. "This partnership ensures more dental professionals can benefit from a proven digital solution that enhances patient care and practice efficiency." TRIOS scanners will be available in select markets for purchase through Nobel Biocare by end June 2025. For more information, please contact your local Nobel Biocare representative. About Nobel BiocareNobel Biocare is a world leader in implant-based dental restorations. Our mission is to empower dental professionals to provide exceptional care through innovative solutions and clinical support. About 3Shape3Shape is a global innovator in digital dentistry, empowering dental professionals to provide superior dental care for every patient, every time. Its award-winning digital solutions advance and connect practices and labs. Founded in Denmark in 2000, 3Shape employs more than 2,200 dedicated professionals, who together serve customers in 100+ countries. Private equity fund EQT has been a shareholder since 2022. For more information, visit Media contact: Lauren View original content to download multimedia: SOURCE Nobel Biocare Sign in to access your portfolio

3 simple recipes that make eating fewer ultra-processed foods easy, by a nutritionist
3 simple recipes that make eating fewer ultra-processed foods easy, by a nutritionist

Business Insider

time20 minutes ago

  • Business Insider

3 simple recipes that make eating fewer ultra-processed foods easy, by a nutritionist

Ultra-processed foods have been linked to health issues such as cardiovascular disease and cancer. While they can be convenient, they should be eaten in moderation, a nutritionist said. Rhiannon Lambert shared recipes for granola, flatbreads, and chocolate peanut bars. In recent years, ultra-processed food has been the subject of endless news reports, books, and online debate. But while research increasingly points to the potential health risks of UPFs, including cardiovascular disease and cancer, they shouldn't necessarily be demonized, the UK-based registered nutritionist Rhiannon Lambert told Business Insider. Processing food can preserve it better, or make it more accessible, she said. "I think UPFs have a place, but they should not be consumed as frequently as they are, and they have become a problem in the sense that most people are now missing out on whole foods by opting for ultra-processed foods instead," Lambert said. In her new book, "The Unprocessed Plate: Simple, Flavourful UPF-free Recipes to Transform Your Life," Lambert explains what people need to know about UPFs and shares recipes to help you eat fewer of them. Below are three recipes that are easy to make from scratch so you can avoid buying ultra-processed versions. Easy yogurt flatbreads "These flatbreads are such a useful recipe to have up your sleeve, and you can use whatever flour you have to hand. Each type of yogurt and flour has different hydration levels, so this recipe is just a guide — if you find the dough is too dry, add splashes of water until it comes together; if you find it's too wet, simply add more flour," Lambert wrote. She continued: "Once you've got the hang of the basic recipe, feel free to experiment by adding some of the optional extras to the dough. The flatbreads are also delicious brushed with a little melted butter as they come out of the pan." Prep: 10 minutes Cook: 10 minutes Nutrition per portion: Fiber: 3.1 grams Protein: 13 grams Ingredients: 400 grams (3 cups/14 ounces) white spelt or wholemeal flour, plus extra to dust 1 tablespoon baking powder 1 teaspoon sea salt 1 teaspoon olive oil, plus extra for frying if needed 200 grams (1 cup/7 ounces) skyr, Greek yogurt, or coconut yogurt Optional extras: Freshly ground black pepper Grated garlic Nigella seeds Cumin seeds Chopped coriander (cilantro) leaves Sliced spring onion (scallion) Desiccated (dried, shredded) coconut Method: 1. Combine the flour, baking powder, and salt in a bowl, then stir in the olive oil and yogurt (add any additional extras now, too). Mix with your hands until the dough comes together, then tip onto a flour-dusted surface and knead for a couple of minutes until you have a smooth dough. Divide the dough into six equal balls, cover with a clean tea (dish) towel, and allow to rest for at least 10 minutes. 2. Meanwhile, set a griddle pan or non-stick frying pan (skillet) over a high heat. 3. Roll each dough ball into a flatbread shape about 20 centimeters (eight inches) long and two millimeters (1⁄8 inch) thick. If your pan isn't non-stick or you want a slightly crisp finish to your flatbreads, brush both sides of the flatbreads with a little olive oil. 4. When the pan is searingly hot, add a flatbread to the pan and cook for 60 to 90 seconds until char marks appear, then flip it over and cook the other side until nicely charred too. Wrap the flatbread in a tea (dish) towel while you cook the rest. Seedy granola "This is such an adaptable recipe that you can make based on what you have in your store cupboard or your personal preferences for flavor and crunch. I love it, as it provides my family and me with lovely healthy fats and fibre for the day ahead. Serve as it is with your preferred milk, or top with fresh fruit and yogurt," Lambert said. Prep: 25 minutes Cook: 40 minutes Nutrition per 40-gram portion: Fiber: 3.3 grams Protein: 5.3 grams Ingredients: 175 grams (6.5 ounces) jumbo oats 175 grams (6.5 ounces) barley, spelt, or rye flakes (or simply use more jumbo oats) 150 grams (5.5 ounces) nuts, roughly chopped (I use a mix of almonds, hazelnuts, pecans, and walnuts) 150 grams (5.5 ounces) seeds (I use a mix of pumpkin, sunflower, sesame, and flaxseeds) 1 tablespoon ground cinnamon, nutmeg, ginger, or cardamom (or a mix) (optional) 50 grams (5 tablespoons/1.75 ounces) coconut oil 100 grams (1⁄3 cup/3.5 ounces) maple syrup 4 tablespoons almond or peanut butter (optional) 75 grams (2.75 ounces) organic* dried fruit, roughly chopped (I use a mix of dried apricots, figs, dates, cranberries, and sour cherries) Sea salt *Select organic dried fruit to ensure it doesn't contain additives like sulphur dioxide Method: 1. Preheat the oven to 160°C/140°C fan/325°F and line your largest baking sheet with baking paper. 2. Mix all the dry ingredients in a large bowl. 3. Melt the coconut oil in a small saucepan over a low heat (or melt in the microwave for 30 seconds). Stir in the maple syrup, nut butter (if using), and a pinch of salt, then mix until fully combined. Pour over the dry ingredients and stir until everything is nicely coated. 4. Spread out in an even layer on the baking sheet and bake for 30 to 35 minutes until golden, stirring and tossing occasionally so that it cooks evenly. 5. Leave to cool on the tray, then stir in the dried fruit. 6. Store in an airtight container at room temperature for up to one week. Note: You can cook this using your air fryer too. Heat the air fryer to 160°C/325°F and air fry for 10 to 12 minutes, tossing occasionally. You may need to air fry the granola in two batches depending on the size of your air fryer, for ultimate crispness. It will crisp up further as it cools. Chocolate, peanut, and date bars "Sticky, nutty, and chocolatey, these are the ultimate pick-me-up. You can slice these into smaller bars if you like, but be aware that you may need a little more chocolate to coat all of them. In the summer, I love to eat these straight out of the freezer sprinkled with a tiny pinch of flaky salt," Lambert said. Makes about 15 bars Cook: five minutes Nutrition per bar: Fibre: 3.3 grams Protein: 5 grams Ingredients: 75 grams (3⁄4 cup/2.75 ounces) jumbo or rolled oats 300 grams (10.5 ounces) pitted Medjool dates 4 tablespoons smooth peanut butter 1.5 teaspoons vanilla extract 0.25 teaspoon sea salt 80 grams (2.75 ounces) unsalted roasted peanuts 175 grams (6.25 ounces) dark (bittersweet) chocolate (at least 75% cocoa solids), broken into small pieces 2 teaspoons coconut oil 1. Line a 20-centimeter (8-inch) square cake pan with baking paper, with plenty of overhang. Place the oats in a blender or food processor and blitz to a fine flour, then tip into a bowl and set aside. 2. Place the dates in the blender or food processor (no need to clean it) with the peanut butter, vanilla, and salt. Roughly blitz, then slowly add 75 milliliters (five tablespoons/2.5 fluid ounces) of water until you have a smooth, thick paste. Be sure to scrape down the sides occasionally. Remove 300 grams (10.5 ounces) of the date mix to a bowl and set aside. 3. Add the oat flour back to the blender or food processor with the remaining date mix and pulse a few times until it's nicely combined. Tip the mixture into the base of the lined pan and use wet fingertips to spread it into a smooth layer that fills the tin. 4. Spread the remaining date mixture on top, smoothing it with a spatula. Evenly sprinkle over the nuts, pushing them in a little. Place in the freezer for at least six hours or ideally overnight until frozen and firm. 5. Lift the frozen slab out of the pan and slice into 15 bars. Line a baking sheet with baking paper. 6. Add the chocolate and coconut oil to a heatproof bowl set over a pan of barely simmering water and heat until just melted, stirring to combine. Alternatively, heat in a microwave on the lowest setting in 30-second blasts, stirring between each, until just melted. If you have a cooking thermometer, the chocolate is ready when it reads 45 to 50°C (113 to 122°F). 7. Working one at a time, submerge the bars in the melted chocolate, using two forks to turn them. Lift out of the bowl using the forks, allowing the excess chocolate to drip back into the bowl, then transfer them to the lined sheet. Once all the bars are coated in chocolate, return the sheet to the freezer or fridge for at least 15 minutes until the chocolate is set. Store in an airtight container in the fridge for up to two weeks or freezer for up to four weeks, but I assure you they won't last long! Note: If you can't find roasted peanuts, simply use unroasted peanuts and roast them in the oven at 180°/160°fan/350°F for eight to 12 minutes until golden. Then use in the recipe as specified.

Nobel Biocare and 3Shape Announce Strategic Distribution Partnership
Nobel Biocare and 3Shape Announce Strategic Distribution Partnership

Associated Press

time20 minutes ago

  • Associated Press

Nobel Biocare and 3Shape Announce Strategic Distribution Partnership

Nobel Biocare to Distribute 3Shape TRIOS® Intraoral Scanners ZURICH, June 23, 2025 /PRNewswire/ -- Nobel Biocare is pleased to announce a new distribution partnership with 3Shape, a global leader in 3D scanning and digital dental solutions. Through this collaboration, Nobel Biocare will become an official distributor of 3Shape's TRIOS® intraoral scanners, expanding its digital dentistry portfolio and delivering even greater value to dental professionals worldwide. 3Shape's TRIOS® scanners are widely recognized for their accuracy, ease of use, and patient-friendly scanning experience. This distribution agreement brings together 3Shape's innovative scanning technology with Nobel Biocare's trusted heritage in implant-based restorations and prosthetics, offering customers a streamlined digital workflow from scan to final restoration. At the same time, we would like to emphasize that the DEXIS IS scanner remains a core element of our offering — an enduring symbol of our strong and strategic partnership with DEXIS. This dual approach not only enhances the range of cutting-edge tools available to dental professionals but also reaffirms our pledge to quality care and innovation, instilling confidence among our customers and key stakeholders, including our valued Envista investors. 'At Nobel Biocare, our mission is to redefine what is possible in Dental care by empowering clinicians through innovation' said Rosemary O'Neill, VP/GM Procera and Digital Solutions 'By partnering with 3Shape and distributing TRIOS scanners, we're enabling our customers to access one of the most advanced intraoral scanning solutions available, supported by Nobel Biocare's expertise and service network.' Key benefits of the partnership include: 'We are excited to collaborate with Nobel Biocare to expand access to TRIOS,' said John Cusack, Chief Commercial Officer at 3Shape. 'This partnership ensures more dental professionals can benefit from a proven digital solution that enhances patient care and practice efficiency.' TRIOS scanners will be available in select markets for purchase through Nobel Biocare by end June 2025. For more information, please contact your local Nobel Biocare representative. About Nobel Biocare Nobel Biocare is a world leader in implant-based dental restorations. Our mission is to empower dental professionals to provide exceptional care through innovative solutions and clinical support. About 3Shape 3Shape is a global innovator in digital dentistry, empowering dental professionals to provide superior dental care for every patient, every time. Its award-winning digital solutions advance and connect practices and labs. Founded in Denmark in 2000, 3Shape employs more than 2,200 dedicated professionals, who together serve customers in 100+ countries. Private equity fund EQT has been a shareholder since 2022. For more information, visit Media contact: Lauren Meinhardt [email protected] View original content to download multimedia: SOURCE Nobel Biocare

DOWNLOAD THE APP

Get Started Now: Download the App

Ready to dive into a world of global content with local flavor? Download Daily8 app today from your preferred app store and start exploring.
app-storeplay-store