NASA moon orbiter spies grave of crashed Japanese lunar lander (image)
When you buy through links on our articles, Future and its syndication partners may earn a commission.
NASA's Lunar Reconnaissance Orbiter (LRO) has imaged the crash site of Resilience, a moon lander built and operated by the Tokyo-based company ispace.
Resilience tried to touch down on June 5 in the center of Mare Frigoris (Sea of Cold), a volcanic region interspersed with large-scale faults known as wrinkle ridges.
Mare Frigoris formed over 3.5 billion years ago as massive basalt eruptions flooded low-lying terrain, according to Mark Robinson, a lunar scientist for the company Intuitive Machines who is based in Phoenix, Arizona. Later, the wrinkle ridges formed as the crust buckled under the weight of the heavy basalt deposits.
Shortly after Resilience's landing sequence, the ispace Mission Control Center was unable to establish communications with the spacecraft. The team determined that Resilience had likely been lost, a conclusion that was firmed up a few hours later.
Also lost on landing was the Tenacious microrover, a small wheeled vehicle developed in Luxembourg by ispace's European subsidiary. Tenacious carried a piece of artwork on its front bumper — Mikael Genberg's "Moonhouse," a small replica of the red-and-white homes famous in Sweden.
Related stories:
— Private Japanese spacecraft crashes into moon in 'hard landing,' ispace says
— Japan's Resilience moon lander aces lunar flyby ahead of historic touchdown try (photo)
— Japan's Resilience moon lander arrives in lunar orbit ahead of June 5 touchdown
Resilience left some telltale marks when it slammed into the moon on June 5, and LRO noticed them.
"The dark smudge formed as the vehicle excavated and redistributed shallow regolith (soil); the faint bright halo resulted from low-angle regolith particles scouring the delicate surface," Robinson, the principal investigator for the Lunar Reconnaissance Orbiter Camera, told Inside Outer Space.
The crash spot is roughly 1.5 miles (2.4 kilometers) from the landing site that ispace mapped out, to one decimal place, on its webpage. One decimal place in lunar latitude and longitude equals 19 miles (30 km), Robinson said.
Resilience was ispace's second moon lander. The company's first such probe also crashed during its touchdown try, in April 2023.
Scott Manley has more details on the Resilience crash; check out his video here.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
10 hours ago
- Yahoo
Honda Now Makes VTOL Rockets and Early Tests Are Encouraging
If we needed any further indication that the 21st-century space race is heating up, Japanese car maker Honda has thrown its hat in the ring with a successful test of a reusable first-stage rocket. Said to have been under development for at least six years, the rocket flew to a height of 900 feet before returning carefully and safely to the launch pad, completely intact. Although the space shuttle pioneered the idea of reusable launch vehicles in the 1970s, it was only in the 2000s and 2010s that the idea really took off. The SpaceX Falcon 9 became the first commercial launch vehicle to nail the reusable first-stage concept, but others have followed in its wake, and many more are expected from US and Chinese aerospace firms in the 2020s. Honda just demonstrated the first potential Japanese launch vehicle that could do much the same. In this test, Honda launched a small rocket, measuring just 21 feet tall and 2.8 feet in diameter, weighing just under 2,900 pounds when fully fuelled up. The rocket took off from its launch pedestal, retracting its landing legs in the process. It then flew carefully to its intended height of around 900 feet before extending fins similar to those of the Falcon 9 and performing a controlled descent. It touched back down within just a few inches of its intended target, according to Honda. The flight lasted just under a minute. Honda said that this test represented the successful deployment of "key technologies essential for rocket reusability, such as flight stability during ascent and descent, as well as landing capability." Honda has discussed its rocket efforts before. As Ars Technica points out, in 2021 it said it had been working on a small launch vehicle for the previous two years and hoped to develope a reusable rocket design that could take a metric ton of payload into orbit. Honda hasn't suggested whether this rocket is the prototype for that design or just a way to test key technologies. It has previously said it would work on rocketry until 2025/2026 and then make a decision on whether to continue, so this test may have been an important indicator of Honda's future plans. "In this market environment, Honda has chosen to take on the technological challenge of developing reusable rockets by utilizing Honda technologies amassed in the development of various products and automated driving systems, based on a belief that reusable rockets will contribute to achieving sustainable transportation," Honda said in a statement.
Forbes
12 hours ago
- Forbes
As SpaceX Explodes Again, Honda Successfully Launches Reusable Rocket
Honda's reusable rocket blasts off in northern Japan. The latest SpaceX rocket explosion is the fourth failure in a row for the company's embattled CEO and Tesla boss Elon Musk as he tries to rebuild his brand after controversial political aspirations. Meanwhile, Honda—not meaning to shine a light of SpaceX problems—has just successfully conducted a launch and landing test of its experimental reusable rocket in northern Japan. Honda's rocket climbed to 890 feet before landing just 15 inches away from where it took off. Honda's rocket flew for 57 seconds and then landed Honda is well-known in industry circles as one of the few carmakers who produces a multitude of non-car products including motorcycles, ATVs, power equipment such as generators, lawnmowers, outboard motors and snowploughs, the HondaJet and robots such as ASIMO. And now it's entered rocket R&D in earnest. At Honda's test facility in Taiki Town located in Hokkaido, Japan's northern-most island, the company launched a reusable rocket that flew for almost a minute to an altitude of 890 feet and then landed with pinpoint accuracy just 15 inches from where it took off, according to Honda. The rocket weighs 2800 lbs which equates to a small car. Developed in-house by Honda R&D Company, the rocket—which weighs 2800 lbs or around the same weight as a small car—shot up vertically, blasting off using its four legs from the company's test site in the northern island of Hokkaido. Honda says its Hokkaido facility 'has been developing itself as a 'space town' through the joint efforts of public and private sectors,' including the Japan Aerospace Exploration Agency (JAXA). The 21-foot high rocket, ascended for 57 seconds before landing around 15 inches from the target touchdown point using its four retractable legs that also aided in its take-off. Honda first revealed its goal to go into space in late 2021. But while the carmaker has been tight-lipped about its R&D progress, it is using existing technology from other areas, such as automated driving systems, to assist in the development of its first reusable rocket. The company says that the reason for developing its own launch system is the need for more satellites that will potentially benefit its other businesses. According to Honda, its rocket research is still in its infancy, and no decisions have yet been made on potential commercialization of these rocket technologies. The company has the ambitious goal to enable a suborbital launch by 2029 but success here will require significant testing and perhaps a few failures. A suborbital flight – upwards of 62 miles above sea level – would be a significant achievement for Honda, even though that is not far enough to put a satellite into orbit. It will be interesting to see if Honda goes all the way, and ends up competing with other private companies like SpaceX and Blue Origin that are capable of conducting orbital flights.
Yahoo
14 hours ago
- Yahoo
Unsung women behind moon landing celebrated in art
More than a thousand unsung women whose circuits helped man land on the moon have inspired two Kent artists to celebrate the historic moment of 1969. The work is based on the female Navajo weavers who were employed for their perceived dexterity to make microchips in New Mexico in the sixties, which were used by NASA in the Apollo Guidance Computer. Moon Landing is by weaver Margo Selby and composer Helen Caddick is a 16m (52ft) handwoven textile suspended from The Trinity Chapel of Canterbury Cathedral, accompanied by an original score for six strings. The tapestry is described as a celebration of the crossover of mathematical patterns, tone and rhythm found in weaving and music and will remain in the chapel until 31 August. Ms Caddick said she was inspired by a weaving tool to compose music about space exploration. She said: "I had gone to see Margo weave and I noticed that she used a shuttle to move the thread along and that made me start to think about space." She added that when she had saw documentaries or films about the space shuttle, she noticed there was an "indicator light flashing in the cabin". "So so I took the rhythm of that to mirror in the harp part," she said. In turn, Ms Selby translated the musician's work into textile art. The textile artist said: "With these incredible carvings and shapes, to see my contemporary work hanging alongside them is truly thrilling." Some 1,200 indigenous people - mostly women - were employed to work at a Fairchild Semiconductor factory in Shiprock, New Mexico, from 1965, during the United States' race to the moon. The manufacturer was tasked with building complicated microchips for NASA's Apollo Guidance Computer, which was integral to space missions. A contemporary brochure from Fairchild compared the intricate work creating elaborate microchips to weaving the Navajo population's traditional tapestries. However, these women who contributed to the space race were largely overlooked in their time. The Dean of Canterbury Cathedral David Monteith said the chapel was excited to celebrate the work of art. "In life sometimes things can become a bit grey scale but this is such an assault of colour that it gladdens the heart and that's such a gift," he said. Follow BBC Kent on Facebook, on X, and on Instagram. Send your story ideas to southeasttoday@ or WhatsApp us on 08081 002250. Mars art installation on display at cathedral Girl, 8, uses dad's ham radio to chat to astronaut Canterbury Cathedral
