Italian physicists explain how to avoid lumps in cheesy pasta sauce
How do you mix cheese and hot water without making it lumpy? This is the question for anyone who has ever tried to make the popular Italian pasta dish Cacio e Pepe, which consists of pasta, the Italian hard cheese Pecorino and pepper.
Physicists have now taken on the challenge of solving this complex culinary puzzle and sharing it with pasta enthusiasts around the world.
In the journal Physics of Fluids, scientists from the Max Planck Institute for the Physics of Complex Systems in Dresden, the University of Padua and other institutions report their findings – and provided what they consider to be a "foolproof recipe."
Normally, fatty substances like cheese do not mix well with water, which is why starch is an important binding agent. Through tests, the research team discovered that 2-3% starch relative to the amount of cheese is optimal for a creamy, uniform sauce.
With less than 1%, the risk of lumps is too high, while more than 4% makes the sauce stiff and unappetising.
Heat is also crucial, as the sauce cannot tolerate much of it. Excessive temperatures destroy the proteins in the cheese, causing it to form lumps – a process the researchers refer to as the undesirable "mozzarella phase."
That's why the water should be cooled slightly before mixed it with the cheese, the scientists say.
"A true Italian grandmother or a skilled home chef from Rome would never need a scientific recipe for cacio e pepe," the study states. "For everyone else, this guide offers a practical way to master the dish."
For those attempting the recipe, the researchers recommend preparing a starch solution – ideally with potato or corn starch – rather than relying on pasta water, where the starch content is unknown.
Dissolve four grams of starch in 40 grams of water and heat it until it reaches a gel-like consistency. To this gel, add another 80 grams of water to cool the mixture.
Only then should the Pecorino (160 grams in this example) be stirred into the starch solution until a homogeneous consistency is achieved. Finally, warm the sauce to serving temperature. Add pepper, mix in the pasta, and the dish is ready.
The researchers had not only scientific curiosity but also a personal interest in the project. "We are Italians living abroad. We often have dinner together and enjoy traditional cooking," co-author Ivan Di Terlizzi from the Max Planck Institute in Dresden is quoted as saying in a statement by the American Institute of Physics.
Cacio e Pepe, he said, seemed like an interesting dish from a physics perspective. "And of course, there was the practical aim to avoid wasting good pecorino."
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
4 hours ago
- Yahoo
Scientists split water molecules for green hydrogen using only solar energy
Green hydrogen is one of the cleanest fuels known, and it has the capacity to decarbonize industries, power vehicles, and more for a sustainable future. Scientists have now announced the development of a scalable next-generation device that can produce green hydrogen by splitting water molecules. The system completely relies on solar energy, doing away with the need for other fossil fuel or energy-dependent methods. The development has been announced by scientists from the Centre for Nano and Soft Matter Sciences (CeNS), Bengaluru, India. It is an autonomous institute of the Department of Science and Technology (DST). The method solely relies on solar energy and earth-abundant materials, without relying on fossil fuels or expensive resources. The Indian research team has designed a silicon-based photoanode using an innovative n-i-p heterojunction architecture, consisting of stacked n-type TiO2, intrinsic (undoped) Si, and p-type NiO semiconductor layers, which work together to enhance charge separation and transport efficiency. The materials were deposited using magnetron sputtering, a scalable and industry-ready technique that ensures precision and efficiency. This approach allowed better light absorption, faster charge transport, and reduced recombination loss, key ingredients for efficient solar-to-hydrogen conversion, according to a release by the Indian Ministry of Science and Technology. The Ministry said that the device achieved an excellent surface photovoltage of 600 mV and a low onset potential of around 0.11 VRHE, making it highly effective at generating hydrogen under solar energy. It further showcased long-term stability, operating continuously for over 10 hours in alkaline conditions with only a 4 percent performance drop. The press release describes it as a rare feat in Si-based photoelectrochemical systems. The new device promises high efficiency, low energy input, robust durability, and cost-effective materials. Even at a bigger scale, the photoanode delivered excellent water-splitting results. 'By selecting smart materials and combining them into a heterostructure, we have created a device that not only boosts performance but can also be produced on a large scale,' said Dr. Ashutosh K. Singh, the leader of the research team. 'This brings us one step closer to affordable, large-scale solar-to-hydrogen energy systems.' The team states that with further development, the solar-powered technology could fuel hydrogen-based energy systems from homes to factories. There have been several developments from across the world in the green hydrogen sector. Automobile, energy companies have been trying to come up with better and more efficient ways to utilize green hydrogen to cut down greenhouse gas emissions, and also costs. Further, there have been multiple research projects ongoing for better ways to make green hydrogen at scale. Earlier this month, a research team from Hanyang University ERICA campus in South Korea had also announced a new type of technology for green hydrogen production. The Korean team developed cobalt phosphides-based nanomaterials by adjusting boron doping and phosphorus content using metal-organic frameworks. These materials had better performance and lower cost than conventional electrocatalysts, making them suitable for large-scale hydrogen production.
Yahoo
13 hours ago
- Yahoo
Nobel laureate concerned about AI-generated image of black hole at the center of our galaxy
When you buy through links on our articles, Future and its syndication partners may earn a commission. The monster black hole at the center of our galaxy is spinning at ear "top speed," according to a new artificial intelligence (AI) model. The model, trained partially on complex telescope data that was previously considered too noisy to be useful, aims to create the most detailed black hole images ever. However, based on the questionable quality of the data, not all experts are convinced that the AI model is accurate. "I'm very sympathetic and interested in what they're doing," Reinhard Genzel, an astrophysicist at the Max Planck Institute for Extraterrestrial Physics in Germany and one of the winners of the 2020 Nobel Prize in physics, told Live Science. "But artificial intelligence is not a miracle cure." For decades, scientists have been trying to observe and characterize Sagittarius A*, the supermassive black hole at the heart of our galaxy. In May 2022, they unveiled the first-ever image of this enormous object, but there were still a number of questions, such as how it behaves. Now, an international team of scientists has attempted to harness the power of AI to glean more information about Sagittarius A* from data collected by the Event Horizon Telescope (EHT). Unlike some telescopes, the EHT doesn't reside in a single location. Rather, it is composed of several linked instruments scattered across the globe that work in tandem. The EHT uses long electromagnetic waves — up to a millimeter in length — to measure the radius of the photons surrounding a black hole. However, this technique, known as very long baseline interferometry, is very susceptible to interference from water vapor in Earth's atmosphere. This means it can be tough for researchers to make sense of the information the instruments collect. "It is very difficult to deal with data from the Event Horizon Telescope," Michael Janssen, an astrophysicist at Radboud University in the Netherlands and co-author of the study, told Live Science. "A neural network is ideally suited to solve this problem." Janssen and his team trained an AI model on EHT data that had been previously discarded for being too noisy. In other words, there was too much atmospheric static to decipher information using classical techniques. Through this AI technique, they generated a new image of Sagittarius A*'s structure, and their picture revealed some new features. For example, the black hole appears to be spinning at "almost top speed," the researchers said in a statement, and its rotational axis also seems to be pointing toward Earth. Their results were published this month in the journal Astronomy & Astrophysics. Pinpointing the rotational speed of Sagittarius A* would give scientists clues about how radiation behaves around supermassive black holes and offer insight into the stability of the disk of matter around it. RELATED STORIES — New view of the supermassive black hole at the heart of the Milky Way hints at an exciting hidden feature (image) — Sagittarius A* in pictures: The 1st photo of the Milky Way's monster black hole explained in images — The 1st Milky Way black hole image was groundbreaking — the next could be even better However, not everyone is convinced that the new AI is totally accurate. According to Genzel, the relatively low quality of the data going into the model could have biased it in unexpected ways. As a result, the new image may be somewhat distorted, he said, and shouldn't be taken at face value. In the future, Janssen and his team plan to apply their technique to the latest EHT data and measure it against real-world results. They hope this analysis will help to refine the model and improve future simulations. This story was provided by a sister site of
Yahoo
a day ago
- Yahoo
First Near-Complete Denisovan Skull Reveals What This Ancient Human Cousin Looked Like
A prominent brow ridge with a brain as large as modern humans and Neanderthals — that's what the archaic human group, the Denisovans, looked like, according to work published this week in Cell and Science. Palaeontologists used ancient molecules to identify a cranium found near Harbin in northeastern China as belonging to the group. It's the first time a near-complete skull has been definitively linked to the extinct people. The fossil, which is at least 146,000 years old, ends a decade and a half of speculation about the Denisovans' appearance. This had remained a mystery since scientists identified them from unique DNA taken from a finger bone found in a Siberian cave in 2010. [Sign up for Today in Science, a free daily newsletter] 'It's really exciting to finally have Denisovan DNA from a nearly complete cranium,' says Janet Kelso, a computational biologist at the Max Planck Institute for Evolutionary Anthropology in Leipzig, Germany. 'We finally have some insights into the cranial morphology of the Denisovans,' she says. 'It's really exciting to finally have Denisovan DNA from a nearly complete cranium,' says Janet Kelso, a computational biologist at the Max Planck Institute for Evolutionary Anthropology in Leipzig, Germany. 'We finally have some insights into the cranial morphology of the Denisovans,' she says. The 'massive' cranium — the upper portion of the skull, lacking the lower jawbone — is one of the best preserved of all archaic human fossils, according to researchers who first described it in 2021. Qiang Ji, a palaeontologist at Hebei GEO University in Shijiazhuang, China, obtained the specimen from an unnamed man in 2018. The man — who Ji suspects discovered the artefact himself but failed to report it to authorities — claimed that his grandfather unearthed the fossil in 1933 during bridge-construction work over Long Jiang (which means dragon river), and buried it in an abandoned well, where it remained until a deathbed confession. In 2021, Ji and his colleagues determined that the 'Dragon Man' fossil represented a new archaic human species, which they crowned Homo longi4. When Ji published those findings, Qiaomei Fu, a geneticist at the Institute of Vertebrate Paleontology and Paleoanthropology in Beijing, got in touch. Fu worked on the very first Denisovan DNA from the Siberian finger bone and wanted to see whether the Dragon Man fossil contained any ancient molecules. She and her team first attempted to extract ancient DNA from a part of the skull called the petrous bone — often a good source — and from an attached tooth. They didn't recover any genetic material but did extract and sequence fragments from 95 ancient proteins from the petrous samples. Fu compared these with Neanderthal, modern human and Denisovan sequences. One protein sequence from the Harbin fossil was identical to that of a protein from the Siberian finger bone, as well as from Denisovans uncovered in Tibet and Taiwan, but differed from proteins in modern humans and Neanderthals. That suggested the Dragon Man individual was a Denisovan. Fu's team identified two further, less conclusive, protein matches. It's the second time this year that researchers have used ancient proteins to identify a fossil as Denisovan. In April, Takumi Tsutaya, a bioarchaeologist at the Graduate University for Advanced Studies in Kanagawa, Japan, and his colleagues identified a Taiwanese jawbone as belonging to a Denisovan. Tsutaya says that he was amazed to learn that another Denisovan has already been identified. But Fu says that she wanted further evidence. She turned to a tiny chip of calcified dental plaque, or calculus. Fu looked for DNA from the host among the bacterial DNA in the sample. And she found it. Genetic sequences from the maternally inherited mitochondrial genome of the Dragon Man skull were most closely related to early Denisovans from Siberia, which were between 187,000 and 217,000 years old. Fu says that this is the first time that host DNA has been recovered from dental calculus from the Palaeolithic era, which ended 12,000 years ago. Rikai Sawafuji, a geneticist at Kyushu University in Fukoka, Japan, who worked on the Taiwanese fossil, was surprised that the team recovered human DNA from the calculus, given that no DNA was recovered from the petrous bone. She says this could spur other researchers to analyse ancient plaque from Palaeolithic fossils. 'If there is some dental calculus,' she says, 'people can extract human mitochondrial DNA from those samples' to learn more about prehistoric human migrations. Potentially more important is that scientists now have a Denisovan cranium that researchers can use to identify other Denisovan specimens in their collections, even if no ancient DNA or protein can be found. This article is reproduced with permission and was first published on June 18, 2025.
