Scientists introduce scalable method to efficiently squeeze hydrogen from seawater
Scientists have introduced a new method that can efficiently squeeze hydrogen from seawater. Developed by researchers at the University of Sharjah, the method offers a clean way to get hydrogen directly from seawater without the need for desalination. The method can be effective for arid coastal regions.Their microenvironment-engineered, multi-layered electrode resists the corrosion and performance degradation typically caused by chloride ions in traditional seawater electrolysis.
In their experiment, researchers successfully extracted hydrogen without removing the mineral salts found in seawater or adding any chemicals.
Published in the journal Small, the study utilizes the strategic integration of carbonate (CO₃2⁻) Lewis base sites anchored on a Cobalt layered double hydroxides (Co LDH) embedded within a NiBOx nanostructure supported by a Ni(OH)₂/NF microarray.The research team revealed that incorporating boron into the Ni-OOH matrix forms a protective metaborate film, preventing metal dissolution and non-conductive oxide formation, thereby enhancing current collector corrosion resistance in saline seawater conditions."We developed a novel, multi-layered electrode that can extract hydrogen directly from seawater efficiently and sustainably. Traditional methods face a host of problems, mainly corrosion and performance degradation caused by chloride ions in seawater," said Dr. Tanveer Ul Haq, Assistant Professor in the Department of Chemistry at the University of Sharjah and the study's lead author.
The custom-built electrode overcomes multiple challenges by creating a protective and reactive microenvironment that boosts performance while resisting damage.The researchers' new advanced anode design achieves an industrially viable current density of 1.0 A cm⁻2 at 1.65 V under standard conditions, marking a significant step toward scalable, desalination-free hydrogen production directly from seawater."The CO₃2⁻ Lewis base covalently functionalized on Co-active sites, establishes a dynamic interaction that continuously splits water molecules while sequestering H⁺ ions, generating a localized acidic microenvironment," said researchers in the study."This acidification enhances OER kinetics and protects against chloride attack and precipitate formation, addressing key stability and efficiency barriers in direct seawater electrolysis."
By eliminating the need for freshwater and energy-intensive desalination, the technology could enable solar-powered hydrogen farms in arid coastal areas such as those in the UAE, where seawater and sunlight are plentiful but freshwater is scarce. If scaled up properly, the system could make it easier to produce large quantities of 'green hydrogen', produced through electrolysis with using renewable energy, reported Engineering & Technology.
Yousef Haik, Professor of Mechanical and Nuclear Engineering at the University of Sharjah and the study's corresponding author, stated that the new system generates hydrogen at industrially relevant rates—1 ampere per square centimeter—with low energy input.
This could revolutionize how we think about hydrogen production in coastal regions, especially in arid countries like the UAE, where freshwater is limited but sunlight and seawater are abundant. The technology's strength lies in the electrode's advanced, multilayered structure, which not only withstands harsh seawater conditions but thrives in them, reported SciTechDaily.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Bloomberg
5 hours ago
- Bloomberg
Universities Win Order Voiding Agency's 15% Research Cost Cap
Brown and Cornell universities, the Massachusetts Institute of Technology and several other US schools won a federal court order striking down a National Science Foundation cap on indirect cost rates for government-funded research. Judge Indira Talwani struck down the cap on Friday, finding it 'arbitrary, capricious and contrary to the law,' granting summary judgment to the suing schools plus the Association of American Universities, and denying that relief to the government.
Gizmodo
9 hours ago
- Gizmodo
NASA Aircraft Set to Perform Wild Low-Altitude Stunts Around These U.S. Cities
NASA is getting ready to fly two planes over mid-Atlantic states and parts of California, where they will be carrying out special maneuvers at a close distance while collecting valuable data about our changing planet. The two research aircraft, named P-3 Orion (N426NA) and a King Air B200 (N46L), are set to fly over Baltimore, Philadelphia, the Virginia cities of Hampton, Hopewell, and Richmond, in addition to the Los Angeles Basin, Salton Sea, and Central Valley, according to NASA. The flights will take place along the eastern coast between Sunday, June 22 and Thursday, June 26, and in California between Sunday, June 29 to Wednesday, July 2. It'll be a good opportunity to catch the two planes as they will fly at lower altitudes than most commercial flights, while pulling off specialized maneuvers like vertical spirals between 1,000 and 10,000 feet (304 to 3,048 meters), circling above power plants, landfills, and urban areas. The planes will also make missed approaches at local airports and low-altitude flybys along runways to collect air samples near the surface. The P-3, operated out of NASA's Wallops Flight Facility in Virginia, is a four-engine turboprop aircraft, carrying six science instruments. The King Air B200 is a twin-engine aircraft owned by Dynamic Aviation and contracted by NASA. The aircraft will carry out 40 hours of data collection for NASA's Student Airborne Research Program (SARP) on each U.S. coast. SARP is an eight-week summer internship program at NASA that provides undergraduate students with hands-on experience in various scientific areas. The low-altitude flights will be used to gather atmospheric data through the on board science instruments, which will be operated by the students. 'Despite SARP being a learning experience for both the students and mentors alike, our P-3 is being flown and performing maneuvers in some of most complex and restricted airspace in the country,' Brian Bernth, chief of flight operations at NASA Wallops, said in a statement. 'Tight coordination and crew resource management is needed to ensure that these flights are executed with precision but also safely.' NASA uses low altitude flights for Earth science, gathering high-resolution data that satellites can't capture at the same level of detail. These flights have typically supported research on climate change, natural disasters, and atmospheric science. The upcoming flights will take place near populated areas, so there will be plenty of chances to see the aircraft flying overhead.
Forbes
9 hours ago
- Forbes
AI-Engineered Cement Formulations Promise To Cut CO₂ Emissions In Half
AI is making its impact felt in the physical world Cement doesn't usually come up in conversations about cutting-edge AI. But that might be changing. A research team at Switzerland's Paul Scherrer Institute (PSI) has created a new AI framework that can generate low-CO₂ cement formulations in seconds. Their goal isn't just to optimize for sustainability. It's to rethink how construction materials are developed in the first place. Engineering Smarter Cement With AI and Chemistry In a new study released this week, researchers at PSI didn't just plug in generic AI tools. They built a custom system tailored for cement. Rather than adapting a generic AI model, the PSI team built a specialized system from the ground up. It starts with their own simulation software, which models how various cement ingredients react during the hardening process. That information is then used to train a neural network that predicts how strong different mixtures will be, based solely on their composition. This compresses what would usually take weeks or months of lab work into just milliseconds. 'This allows us to simulate and optimise cement formulations so that they emit significantly less CO₂ while maintaining the same high level of mechanical performance,' Romana Boiger, lead author of the study, explains. The team also applied genetic algorithms, computational tools that mimic natural selection, to find mixes that best balance strength and emissions. The top-performing blends are then flagged for real-world testing. What sets this apart is the integration of genetic algorithms, commonly used in AI optimization. These are applied to find a range of 'best-fit' options where trade-offs between performance and sustainability are balanced. From there, top candidates can be selected for experimental validation. Cement Is an Unlikely But Ideal Test Bed for AI You might not expect it, but cement is one of the world's biggest climate problems. It's responsible for about 8% of global carbon dioxide emissions, largely due to the chemical process used to produce clinker, a key ingredient. Despite decades of improvements, the underlying chemistry hasn't changed much. That's why PSI's method stands out. Instead of altering the process or adding carbon capture systems, the team re-engineers the formula itself. The result? Cement that's just as strong, but far less carbon-intensive. Implications for the Today's Cement Built Environment So far, the data is promising. Some of the most effective mixes identified by PSI's AI match today's performance standards but emit up to 50% less CO₂. That kind of efficiency could have a huge impact, especially as global cement demand continues to rise. Nikolaos Prasianakis, head of PSI's Transport Mechanisms Research Group and co-author of the study, puts it this way: 'The range of possibilities for the material composition – which ultimately determines the final properties – is extraordinarily vast. Our method allows us to significantly accelerate the development cycle by selecting promising candidates for further experimental investigation.' These gains could scale quickly. With global per capita cement use averaging about 1.5 kilograms a day, even modest efficiency gains would lead to major emissions cuts. John Provis, who leads PSI's Cement Systems Research Group, highlights just how big the opportunity is. 'To put it bluntly, humanity today consumes more cement than food – around one and a half kilograms per person per day,' he explains. 'If we could improve the emissions profile by just a few percent, this would correspond to a carbon dioxide reduction equivalent to thousands or even tens of thousands of cars.' The Bigger AI Movement in Materials Science PSI isn't alone in applying AI to cement. At the University of Illinois Urbana-Champaign, researchers partnered with Meta and concrete supplier Ozinga to develop AI-optimized concrete that cut carbon by 40%. MIT has trained models to scan research papers and databases to identify novel, low-emission materials. But PSI's approach stands out for one reason: it doesn't rely on past data alone. Instead, it combines deep chemical simulations with machine learning, creating a model that can adapt to regional raw materials and different production scenarios—without having to test every possibility by hand. Challenges and Commercialization Of course, a promising model isn't enough. These cement mixes still need to prove themselves under real-world conditions, such as curing, durability, supply chain fit, and compliance with global standards like EN 197-1. 'This is just the beginning,' he says. 'The time savings offered by such a general workflow are enormous – making it a very promising approach for all sorts of material and system designs.' The team is already looking to expand the model to account for real-world constraints, such as regional resource availability, cost, and lifecycle performance. These are key steps if the AI is to become more than a research tool. The Bigger Picture for AI's Practical Use What makes this effort compelling is that it delivers something tangible, not just predictions or insights, but real physical materials. A better cement mix might not sound as exciting as generative images or chatbots, but the implications are massive. This might be the broader signal for AI's next phase. It's no longer confined to virtual outputs. Increasingly, it's shaping the materials that make up the real world. And in this case, it's rewriting the recipe for the very foundation we build on.
