Parachutes for uncrewed spaceflight of Gaganyaan mission flagged off
A set of parachutes developed for the first uncrewed mission of India's Gaganyaan human spaceflight programme was shipped from Agra on Monday (May 5, 2025). The parachutes were developed by the Aerial Delivery Research and Development Establishment (ADRDE), an Agra-based laboratory under the Defence Research and Development Organisation (DRDO).
'Indigenously developed parachutes for the safe return of the capsule that will carry astronauts under the proposed Gaganyaan Programme are set to undergo [testing in an] unmanned mission by the Indian Space Research Organisation (ISRO),' ADRDE stated. According to the statement, the parachute configuration consists of 10 parachutes designed for sequential deployment.
Under the Gaganyaan programme, ISRO aims to send a crew of two or three astronauts into Low Earth Orbit (LEO).
Explaining the recovery sequence during flight, the ADRDE statement detailed that it begins with the deployment of two Apex Cover Separation parachutes (which protect the main parachute compartment). This is followed by two Drogue parachutes to stabilise the module and reduce its velocity. Subsequently, upon release of the drogue chutes, three Pilot parachutes are deployed to extract the three Main parachutes individually. The Main parachutes are designed to reduce the crew module's speed to safe levels for landing.
The flight unit parachutes were formally flagged off by Dr. Manoj Kumar, Director of ADRDE. They have been dispatched to the ISRO Satellite Integration and Testing Establishment (ISITE) in Bengaluru.
These parachutes are intended for the first uncrewed Gaganyaan mission, designated G-1. The ADRDE team will proceed to assemble the parachutes with the crew module at ISITE in preparation for this mission, which is planned for later this year.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
The Hindu
19 minutes ago
- The Hindu
Kanjirappally taps technology for disaster preparedness
With landslides and flash floods on the rise due to extreme rainfall events, the eastern high ranges of Kottayam are gearing up for a tech-enabled defence by installing rain gauges to establish an early warning system to improve disaster preparedness. As part of this initiative, the Wayanad-based Hume Centre for Ecology and Wildlife Biology has begun a preliminary study to identify the most vulnerable zones within the Kanjirappally Block. According to officials, rain gauges will be installed in these areas to monitor rainfall trends and assess the risk of potential landslides and floods. 'The project also includes detailed mapping of the region, dividing it into 2.5-sq.-km grids based on rainfall data. This grid-based approach will help pinpoint disaster-prone areas and support the development of focused mitigation and preparedness plans,' they said. With precipitation levels regularly exceeding that of neighbouring regions, the Kanjirappaly region is susceptible to climate change-induced hazards. Officials have identified the hill tracts of Vagamon, Kootickal, Enthayar, Elamkadu, Koruthodu and Kanamala as priority zones where the risk of cloudbursts and landslides is especially high. A couple of weeks ago, the Cochin University of Science and Technology (CUSAT), the Indian Institute of Space Science and Technology (IIST), and the Environmental Resources Research Centre (ERRC) joined forces to deploy an automated landslide warning system in the region. Supported by NewSpace India Limited (NSIL), the commercial arm of ISRO, three Automatic Weather Stations (AWS) have been set up in Theekoy, Poonjar Thekkekara, and Moonnilavu panchayats, all located within the Meenachil river basin. These AWS units continuously track key environmental parameters such as wind speed, humidity, temperature, rainfall, soil moisture, and soil temperature. The real-time data is transmitted to servers at CUSAT, where it is analysed for early signs of potential disasters.
The Hindu
2 hours ago
- The Hindu
Work hard to enable India to take humans to moon by 2040: Former ISRO Chief tells youth
Former ISRO Chief and Space Commission member A.S. Kiran Kumar on Sunday asked youth to work hard to make India a space capable nation and enable the country to take humans to moon by 2040. Speaking on the topic 'Igniting the future: ISRO's legacy and beyond', at the Ramakrishna Mutt in Mangaluru on Sunday, Mr. Kumar said the nation, which is moving towards becoming world's largest economy, cannot ignore space economy. The space economy is a trillion dollar economy. Space tourism and space adventure provided tremendous opportunity. Mr. Kumar said, 'Unless our capability in space mission is demonstrated other nations will not take note of India. Youngsters should become leaders and showcase our capability in space science.' Works are on towards having country's own space station by 2035. 'By 2040 we have to take humans to moon and bring them back,' the former ISRO chief said. The government is allowing more people to work in space science. Private entities and consortium of firms are being allowed to launch their satellites. Since the start of the space programme for non-military purpose in October 1957, ISRO has leapfrogged in space technology to indigenously develop different launch pads and launch a number of satellites, he said. 'NavIC, the country's own satellite-based navigation system developed by ISRO, is helping fishermen to navigate through sea in a safe way and find fish. With the feed from satellites and other information, there is advance information about cyclones, which has helped government to evacuate and save lives of people from places that are likely to be affected,' he said. The feed from satellites is also helping forecast crop yield. The use of satellites in hitting precise targets in enemy nation was demonstrated in the recent Operation Sindoor, he said. The youth, he said, are left with lot of problems to solve. 'You have tremendous capability. Rise and lead the country to regain the glory as the place of harmony and peace,' he said.
Mint
3 hours ago
- Mint
Gujarat Electronics Component Manufacturing Policy aims to reduce import dependency
Ahmedabad, Jun 22 (PTI) Incentives for projects approved by MeitY, quick disbursal of assistance and reducing import dependency by attracting over ₹ 35,000 crore in new investments are among the prominent features of the Gujarat Electronics Component Manufacturing Policy-2025. The policy, which aims to transform Gujarat into a global hub for electronics manufacturing, was unveiled by Chief Minister Bhupendra Patel on Sunday. The policy states that projects approved and supported by the Union Ministry of Electronics and Information Technology (MeitY) will be eligible for 100 per cent Central assistance when established in Gujarat. Projects approved by the MeitY will receive incentives from both the Centre and the state government through a single approval and incentive assistance will disbursed within 30 days, a government release stated. "This means MeitY-approved projects set up in the state will receive dual incentive benefits from the Central and Gujarat governments," it said. Aligned with the Union government's Electronics Component Manufacturing Scheme (ECMS), the policy ensures "a 100 per cent top-up on Central support while guaranteeing timely disbursement of assistance. "Once a project is approved under the ECMS from MeitY, it will automatically become eligible for the same grant-in-aid in Gujarat. The state government will disburse its incentive within 30 days of the Centre releasing the assistance," the release said. The policy aims to reduce dependence on imports and improve technological resilience by attracting over ₹ 35,000 crore in new investments. It aims to create substantial high-skilled employment opportunities within the state's electronics component manufacturing sector. The policy hopes to boost investment in key segments, such as multi-layer and HDI printed circuit boards, lithium-ion cells, SMD passive components, display and camera modules, electronic parts, and the additional machinery for their production. "The policy's core focus is to bridge the talent gap, promote innovation, and offer support for research and development initiatives, with the recognised Gujarat-based institutions being eligible for assistance of up to ₹ 12.5 crore to establish centres of excellence, finishing schools, or applied research laboratories," the release stated. The policy aims to establish Gujarat as a prominent player in global electronics supply chains by promoting the manufacturing of local electronic components and sub-assembly production, reducing import dependency, and boosting exports, which will drive product value growth in global electronics value chains (GVCs). The Government of India (GoI) guidelines mandate the submission of applications to avail of the benefits of this policy by July 31, 2025. All MeitY-approved projects operating in Gujarat will automatically become eligible for availing of the policy benefits along with developing or proposed projects for incentives. The government said only the units other than those receiving assistance under Gujarat Electronics Policy 2022-28 will be eligible for benefits under this policy, and those availing benefits under this policy will not qualify under the Gujarat Electronics Policy.
