Mercedes unveils new luxury limousine EV segment called 'Vision V'

SHANGHAI (Reuters) -German carmaker Mercedes-Benz unveiled on Tuesday a new all-electric luxury limousine segment it called "Vision V" which it said marked the expansion of the top end of its vans portfolio.
CEO Ola Källenius told an event in Shanghai that models under Vision V would range from VLE to VLS and that they would also be produced in China.

Try Our AI Features

Explore what Daily8 AI can do for you:

Learn with AIFact CheckingText to SpeechAI Summary

Related Articles

Forbes

31 minutes ago

• Forbes

YASA: UK Company Leading The Electrified Performance Car Revolution

The Ferrari SF90 Stradale takes advantage of YASA's electric motor technology. Electric cars predate those running on fossil fuel, but development was mostly dormant for a century after the combustion car took over in the early 1900s. The EV as we currently know it has only been around for a little over a decade. There's a lot of technological development taking place now, however. While most of the attention has been on batteries, motor innovation is extremely important too. One of the leading companies driving new motor technology is the UK's YASA, purchased by Mercedes in 2021. I talked to Tim Woolmer, Founder and CEO of YASA, about what makes his company special. YASA Technology: Available In An Electrified Supercar Near You The YASA name may not be familiar, but its electric motors are the secret sauce behind hybrid supercars including the Ferrari SF90 Stradale and 296 GTB, Lamborghini Revuelto and Temerario, McLaren Artura, and Mercedes-AMG GT 63 S E-Performance. The latter is particularly relevant because of YASA's ownership change. This will also be the brand of the first all-electric car to use YASA motors. 'AMG has spoken about its new architecture, and the first car launched will be high performance electric vehicle,' says Woolmer. 'It's going to be a lot of fun, but it will be a different clientele than a mid-engine supercar.' YASA's focus will remain high-performance cars, but the company always had wider goals. 'Our core mission is to accelerate electrification. Our customers today have a good fit with the USPs of the product. They appreciate the size, light weight, repeatable performance, and efficiency.' The Lamborghini Revuelto is another electrified supercar using YASA's motors. Originally, the YASA motor was extremely low volume, used in halo hypercars such as the Jaguar C-X75, Koenigsegg Regera and a land speed record car produced by Lola-Drayson. Now YASA is increasing its production capacity considerably. In 2024, the company produced 14,000 motors, and with a new facility in Bicester Motion, this will increase to 25,000 motors annually for 2025-27. As part of the Mercedes relationship, its motors will also be produced in Berlin by Mercedes-AMG itself. 'We're going down this journey of commoditizing the product, going to high volumes, and reducing costs,' says Woomer. 'I'm absolutely convinced that the technology has got a perfect USP in the sports car industry. But as we move to new architectures, it could be commoditized to wider volume appeal. Lightweight is great for everything.' YASA Motors Mean The Yoke's On You The clue to YASA innovation is in its name, which stands for Yokeless And Segmented Armature. The motors use a different design to conventional radial flux systems, which almost all other electric motors employ. They don't have an iron core (or yoke), while the rotating part of the motor is segmented. This is an axial flux system, with permanent magnet rotors on either side of the electromagnetic stator. The result is around three times the torque density per kg compared to a radial flux motor, and a considerable reduction in raw material usage. Where a Tesla motor might have around 30kg of iron, a YASA motor only requires 3kg for the same power and torque. It's also a quarter of the size with a third of the copper. While this is useful for any electrified vehicle, weight saving alongside high power are particularly beneficial for performance vehicles. YASA's Axial Flux design is much lighter and more compact than a traditional Radial Flux motor. 'There are no downsides to it,' says Woolmer. 'You can take 200 kilograms directly out of a vehicle. Then you could start to see electric vehicles on par or even becoming lighter than their internal combustion engine equivalents. That's a real problem we must deal with, because EVs have a weight problem. They're up to 400kg heavier than a regular car.' YASA can produce motors from 100hp to 1,000hp, depending on the application. Most of its projects so far have been tailored to a specific customer's needs, rather than vice versa. However, this flexibility means YASA is ready to produce motors for all-electric cars. 'The first pure EVs going to production will be with AMG,' says Woolmer. 'The hybrids have been a wonderful preparation for that, because the motor is very similar.' The YASA motor used by Ferrari. The British Advanced Propulsion Centre (APC) has been a key factor in YASA's growth. This is a joint UK government and industry-funded organization supporting the development of low-carbon propulsion technologies for the automotive industry to accelerate the transition to Net Zero. 'I don't think I would be exaggerating if I said I genuinely don't think this factory would exist without the APC,' says Woolmer. However, the Mercedes-Benz acquisition has enabled YASA to take its technology to a different level commercially. 'YASA was never looking to be acquired,' says Woolmer. 'But Mercedes put forward a compelling case for the purchase. They wanted us to be the speed boat; they didn't want to destroy our culture. They wanted us to keep our innovation and our brand. In return, they've got the industrial might to invest in the technology, which they've done both here and in and in the factory in Berlin. Four years later, they were true to all those statements. They've invested a lot in the assets, giving us a big new facility at Bicester Motion. That was a £70 million investment, plus a big investment in the technology to scale it up. They have been the perfect scaling partner.' YASA's UK Tech Triumph Despite the factory in Berlin, YASA will still be a UK-based company. 'We will remain fully British with our headquarters in Bicester Motion,' says Woolmer. 'All the R&D on the technology is happening here in the UK. Mercedes has manufacturing satellites all around the world, but manufacturing is not where the core Intellectual Property resides. The aspiration is to increase manufacturing the UK, not just do R&D here.' YASA will continue to develop its technology and build motors in the UK. The UK will also continue to manufacture for customers other than Mercedes, where Berlin will solely serve AMG. But now YASA has much more scale available. 'Ten years ago, we struggled to make 150 motors,' says Woolmer. 'Now, if we got a contract for 50,000 motors, we would know what to do.' YASA isn't sitting on its laurels and is already looking towards the next development. 'The game changer will be in-wheel motor technology,' says Woolmer. 'Renault launched the 5 Turbo 3E that will be the first production vehicle with in-wheel motors, although it's a limited series.' Donut Lab is another company chasing this possibility. 'We're not focused on it yet, but in the future, we will talk about it a lot more. We've got technology that can radically transform the way we design vehicles, and that really is empowered by the size and the weight of the motors. People have been trying to crack in-wheel motors for 25 years, and it's hard, but based off all the learning we've had so far, we think we've got the tech to do it.'

New York Post

4 hours ago

• New York Post

British tycoon Mike Lynch's sunken Bayesian superyacht raised towards surface ahead of final lift — 10 months after tragedy

Salvage experts winched Mike Lynch's sunken superyacht towards the surface on Friday, 10 months after it went down off the coast of Sicily, killing the British tech tycoon, his teenage daughter and five others. The vessel is scheduled to be lifted out of the water in the final phase of the recovery on Saturday, TMC Marine, the company leading the salvage operation, said. 'Accelerated progress in salvage works off the coast of northern Sicily mean that all preparations are now nearing completion, ahead of the delicate lifting procedure,' the statement said. 7 Officials recover the 'Bayesian' yacht off the coast of Sicily on June 20, 2025. REUTERS The work was briefly halted last month after the death of a diver involved in the operation. The 184-foot Bayesian was moored off the small port of Porticello, near Palermo, in August last year when it sank during a sudden storm. The yacht was vulnerable to violent winds and was probably knocked over by gusts of more than 73 miles per hour, an interim UK report said last month. The recovery process has been made easier after the vessel's 236-foot mast was detached using a remote-controlled cutting tool and placed on the seabed on Tuesday. The hull of the yacht has been supported by a specially designed steel wire lifting arrangement which is, in turn, attached to a floating lifting asset. 7 The vessel is scheduled to be lifted out of the water in the final phase of the recovery on Saturday. AFP via Getty Images 7 The measurements of the Bayesian superyacht. NY Post Composite 7 Surveillance video captured the yacht in a storm before it sank on Aug. 19, 2024. The vessel is between two barges supplied by Hebo Maritimeservice, a Dutch specialist salvage company. The salvage experts are now reinforcing the cables because the yacht will be heavier once pulled out of the water, a source at the Italian coast guard said. The yacht is expected to be transported to the nearby port of Termini Imerese on Monday and handed over to the authorities who are investigating the tragedy. 7 Mike Lynch and his daughter Hannah Lynch. FAMILY HANDOUT 7 Morgan Stanley International Chairman Jonathan Bloomer and his wife Judy Bloomer. FAMILY HANDOUT 7 Chef Recaldo Thomas. @ Lynch's daughter Hannah, lawyer Chris Morvillo and his wife Neda, banker Jonathan Bloomer and his wife Judy, and chef Recaldo Thomas were killed when the yacht sank. Nine other crew members and six guests were rescued.

USA Today

6 hours ago

• USA Today

Wrong turn sends driver down Spanish Steps, car lifted by crane, video shows

An elderly man's wrong turn down a famous Italian landmark led to his vehicle being craned away. An 80-year-old man on his way to work mistakenly drove his Mercedes-Benz sedan down Rome's famous Spanish Steps in the early morning June 17, Italian media reports show. Video captured the driver slowly navigating down the historic stairs before getting stuck as well as the audio reaction of bystanders in disbelief. Police said the man exited the vehicle uninjured and firefighters used a crane to remove the vehicle from the steps, Italian outlet Il Corriere della Sera reported. Public access to the Spanish Steps was temporarily restricted while experts with the Ministry of Culture examined the extent of damage caused by the driver, according to CBS News. Was the driver under the influence? Upon being taken to a local hospital, the man tested negative for both alcohol and drug consumption, CNN reported citing city police. However officers said the driver appeared to be in a state of confusion, according to Il Corriere della Sera. He reportedly had a valid driver's license. The peculiar moment wasn't the first time a vehicle drove through the historic landmark. In 2022, a Saudi man was charged with aggravated damage to cultural heritage after footage captured a Maserati driving down the same steps. What are the Spanish Steps? Build between 1723 and 1726, the Spanish Steps lead from the iconic Piazza di Spagna square to the French monastery church Trinita dei Monti, according to Rome's tourist site. The landmark features 135 total steps as well as three different terraces that reference the Holy Trinity or the Trinità. Tourists often visit the top of the stairs for a scenic view of Rome.