Ruby-Red 1956 Porsche 356A on Bring a Trailer Is a Jewel
The Porsche 356 established the brand's reputation around the world.
This example looks factory fresh but has significant performance upgrades.
The discrete hot-rodding should make it much more enjoyable to drive in modern conditions.
Long before the 911 emerged, early Porsches made a name for the brand by doing more with less. When the 356 won its class at Le Mans in 1951, the world sat up and took notice, and it wasn't long before importer Max Hoffman had established the pride of Stuttgart as an institution on this side of the Atlantic. Thing is, a 1950s Porsche 356 is still very much a car of its time, with performance that might not match modern traffic. Not so with this 1956 356A for sale on Bring a Trailer (which, like Car and Driver, is part of Hearst Autos). It's been restored and discreetly updated with tasteful improvements to make the driving experience match the looks.So-called "outlaw" 356s are an established trend by now, the form kicked off by customizer Rod Emory in his California-based shop. But while many of Emory's 356s defy the rules to build full-on Porsche hot-rods, this car is all about the hidden details. It's even finished in the original factory paint color, a rich Polyantha Red.
From the outside, only 15-inch Boyd Coddington wheels and a custom dual exhaust hint that there's anything non-stock going on here. Those wheels hide disc brakes at all four corners—early 356 drum brakes can be a bit alarming when you suddenly spot a deer crossing the road—and the braking system is further upgraded with some 911 parts.On the inside, GT-style bucket seats and a Nardi steering wheel are the highlights of a complete reworking, including new carpeting and refreshing the dashboard. The instrumentation is rebuilt, the chrome redone, and the tachometer converted to electric operation.
The 356A marked the first time the twin-cam Carrera engine was available in a road car, but the largest displacement available at the time was 1.6 liters. This car gets a built up 2.2-liter flat-four for far more torque, especially lower in the rev range, and peak power of 160 horsepower at 6000 rpm. Built by FAT Performance, also based in California, this engine is a howler, and should provide considerable shove in a car that weighs around 2000 pounds.The four-speed manual transmission is also reworked, with short gearing except for fourth, which is a longer "freeway flyer" gear for cruising. This is a fantastic-looking little car in a great color combination, but the real appeal here is the driving experience, supported by performance parts from the best suppliers out there.
While it's perhaps overshadowed by the 911 as the most recognizable Porsche, the 356 is a very special car to drive, impressive even after nearly 75 years. This one takes that performance and remasters it for 2025, while keeping the 1950s-era charm. Besides, everyone's doing 911 restomods these days. Why not grab a Porsche from the time when it was first putting the world on notice?
The auction ends on April 2.
You Might Also Like
Car and Driver's 10 Best Cars through the Decades
How to Buy or Lease a New Car
Lightning Lap Legends: Chevrolet Camaro vs. Ford Mustang!
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
an hour ago
- Yahoo
This Was The Last Carbureted Engine Sold New In America
Ah yes, the carburetor. A humble device that mechanically mixes fuel and air, which gets sucked down the intake manifold and into the cylinders to feed the internal combustion process. The carburetor, or just carb for short, had a long run as the de facto fuel metering device on American automobiles, beginning with the Duryea brothers' converted horse buggy in 1893 -- several years ahead of Henry Ford's slightly less rudimentary Quadricycle. Fast forward 100 years and the writing was on the wall for the carburetor. By the late 1980s, California was mandating stricter emissions control equipment on all vehicles sold in that state through the California Air Resources Board, which amusingly abbreviates to CARB. California is such a large market for automakers that it's frequently simpler and less expensive to make all production cars intended for U.S. markets compliant with California's rules than to make a slightly different configuration for the Golden State. On a related note, California may no longer be able to set its own unique emissions standards, but we digress. The other death knell for the carb was the implementation of the OBD-II onboard diagnostic system in California by 1994 and nationwide by 1996. For those who aren't mechanically inclined, the port to connect to the OBD-II system is that trapezoidal dongle that's under the driver's side dashboard of your modern vehicle. Computer-controlled carburetors were attempted as a stopgap measure prior to perfecting economical fuel injection in the 1980s, but proved troublesome for both motorists and mechanics alike. Read more: The Best-Looking Pickup Trucks Ever Sold, According To Our Readers By the final decade of the 20th century, domestic automakers had abandoned the carburetor in all of their vehicles except for two. First up is the Ford LTD Crown Victoria equipped with the larger 5.8-liter V8 engine. While the regular 5.0-powered LTD Crown Victoria had long been equipped with fuel injection, the 5.8-liter 351 Windsor soldiered on with a two-barrel carb for fleet sales -- such as Crown Vic cop cars -- throughout the 1991 model year. Jalopnik readers probably won't be surprised to hear that the other carburetor-equipped American car on the market in 1991 was the Jeep Grand Wagoneer (SJ), which looked like it teleported straight from 1963. By its final production year the SJ was down to just one powerplant, a 360 cubic inch AMC V8. Perched on top was an anemic two-barrel carburetor provided by Ford's Motorcraft division because, well, why not? Of course, this article is about the last carbureted engine sold in America, not just produced here. So let's move on, shall we? In spite of the onboard diagnostic equipment mandate looming large, a few Japanese automakers opted to continue selling carbureted vehicles right up until the bitter end. The primary recipients of the antiquated fuel delivery device were bargain basement compact pickup trucks and SUVs. For example, Mazda's B2200 pickup retained a carb in non-California trucks until that model was discontinued after 1993. Still basking in the afterglow of its wildly successful Joe Isuzu advertising campaign, Yokohama-based Isuzu also continued foisting carburetor-equipped masterpieces onto the American motoring public well into the 1990s. Take, for example, the base-engine-equipped 1993 Amigo, a sort of Wrangler-esque member of the two-door SUV club. Isuzu also has the distinction of making the very last carbureted vehicle sold new in America. The same 2.3-liter four-cylinder that powered the 1993 Amigo was also found throughout 1994 in very basic rear-wheel drive iterations of the brand's pickup truck, literally called Isuzu Pickup. So there you have it. The 1994 Isuzu Pickup with a base engine was the last carbed passenger motor vehicle sold new on U.S. soil. Automakers may have been nudged into fuel injection by California's rigid emissions monitoring and nationwide OBD-II requirements, but the change was indisputably for the better. Fuel injection is more efficient, both in terms of increasing fuel economy and lowering tailpipe emissions. It also makes more power than carburetors while requiring less maintenance and tuning. Finally, fuel injection is more readily adaptable to changes in operating conditions, such as temperature and altitude. RIP to the carb -- it had a good run. Want more like this? Join the Jalopnik newsletter to get the latest auto news sent straight to your inbox... Read the original article on Jalopnik.
Yahoo
an hour ago
- Yahoo
This Was The Last Carbureted Engine Sold New In America
Ah yes, the carburetor. A humble device that mechanically mixes fuel and air, which gets sucked down the intake manifold and into the cylinders to feed the internal combustion process. The carburetor, or just carb for short, had a long run as the de facto fuel metering device on American automobiles, beginning with the Duryea brothers' converted horse buggy in 1893 -- several years ahead of Henry Ford's slightly less rudimentary Quadricycle. Fast forward 100 years and the writing was on the wall for the carburetor. By the late 1980s, California was mandating stricter emissions control equipment on all vehicles sold in that state through the California Air Resources Board, which amusingly abbreviates to CARB. California is such a large market for automakers that it's frequently simpler and less expensive to make all production cars intended for U.S. markets compliant with California's rules than to make a slightly different configuration for the Golden State. On a related note, California may no longer be able to set its own unique emissions standards, but we digress. The other death knell for the carb was the implementation of the OBD-II onboard diagnostic system in California by 1994 and nationwide by 1996. For those who aren't mechanically inclined, the port to connect to the OBD-II system is that trapezoidal dongle that's under the driver's side dashboard of your modern vehicle. Computer-controlled carburetors were attempted as a stopgap measure prior to perfecting economical fuel injection in the 1980s, but proved troublesome for both motorists and mechanics alike. Read more: The Best-Looking Pickup Trucks Ever Sold, According To Our Readers By the final decade of the 20th century, domestic automakers had abandoned the carburetor in all of their vehicles except for two. First up is the Ford LTD Crown Victoria equipped with the larger 5.8-liter V8 engine. While the regular 5.0-powered LTD Crown Victoria had long been equipped with fuel injection, the 5.8-liter 351 Windsor soldiered on with a two-barrel carb for fleet sales -- such as Crown Vic cop cars -- throughout the 1991 model year. Jalopnik readers probably won't be surprised to hear that the other carburetor-equipped American car on the market in 1991 was the Jeep Grand Wagoneer (SJ), which looked like it teleported straight from 1963. By its final production year the SJ was down to just one powerplant, a 360 cubic inch AMC V8. Perched on top was an anemic two-barrel carburetor provided by Ford's Motorcraft division because, well, why not? Of course, this article is about the last carbureted engine sold in America, not just produced here. So let's move on, shall we? In spite of the onboard diagnostic equipment mandate looming large, a few Japanese automakers opted to continue selling carbureted vehicles right up until the bitter end. The primary recipients of the antiquated fuel delivery device were bargain basement compact pickup trucks and SUVs. For example, Mazda's B2200 pickup retained a carb in non-California trucks until that model was discontinued after 1993. Still basking in the afterglow of its wildly successful Joe Isuzu advertising campaign, Yokohama-based Isuzu also continued foisting carburetor-equipped masterpieces onto the American motoring public well into the 1990s. Take, for example, the base-engine-equipped 1993 Amigo, a sort of Wrangler-esque member of the two-door SUV club. Isuzu also has the distinction of making the very last carbureted vehicle sold new in America. The same 2.3-liter four-cylinder that powered the 1993 Amigo was also found throughout 1994 in very basic rear-wheel drive iterations of the brand's pickup truck, literally called Isuzu Pickup. So there you have it. The 1994 Isuzu Pickup with a base engine was the last carbed passenger motor vehicle sold new on U.S. soil. Automakers may have been nudged into fuel injection by California's rigid emissions monitoring and nationwide OBD-II requirements, but the change was indisputably for the better. Fuel injection is more efficient, both in terms of increasing fuel economy and lowering tailpipe emissions. It also makes more power than carburetors while requiring less maintenance and tuning. Finally, fuel injection is more readily adaptable to changes in operating conditions, such as temperature and altitude. RIP to the carb -- it had a good run. Want more like this? Join the Jalopnik newsletter to get the latest auto news sent straight to your inbox... Read the original article on Jalopnik.
Fox Sports
4 hours ago
- Fox Sports
Qualifying Notes: Kyle Moyer Lands New Job with Arrow McLaren
INDYCAR Kyle Moyer's time as a free agent didn't last long. The veteran team manager who was one of three executives released last month by Team Penske has been hand-picked by Arrow McLaren Team Principal Tony Kanaan to join the Indianapolis-based NTT INDYCAR SERIES program. Moyer will be the organization's director of competition beginning with next week's test at Iowa Speedway. Kanaan and Moyer worked together for years at Andretti Global when Kanaan was a driver. Moyer was the team manager when Kanaan won the INDYCAR SERIES championship in 2004. Moyer left Michael Andretti's team in 2015 to join Roger Penske's organization. Moyer, along with Team President Tim Cindric and Managing Director Ron Ruzewski, were released by Team Penske in advance of the recent Indianapolis 500 presented by Gainbridge after the cars of defending champion Josef Newgarden and Will Power were found with unapproved modifications ahead of qualifying. At Arrow McLaren, Moyer will replace Kanaan as the race strategist for Nolan Siegel, allowing Kanaan to work with all three Arrow McLaren drivers on race weekends. Kanaan told the Associated Press that almost every team in the paddock tried to hire Moyer, but the relationship the two of them have gave McLaren the edge. 'Kyle is one of the best strategists in the paddock, so talking about his qualities, not just about him as a human being, he knows a lot about racing,' Kanaan told the AP. 'Kyle probably is one of the top guys of knowledge of INDYCAR. He's been around it his entire life.' Moyer grew up in Monrovia, Indiana, and was brought into the sport by the Bettenhausen family. Kirkwood Credits Decision Making to Surge Series points leader Alex Palou had the spotlight for most of the first half of the season. A dominant start featured five wins in six races, including an Indy 500 victory, and made him the undisputed championship favorite. But lately, Andretti Global's Kyle Kirkwood has turning heads – and is turning the title tide. Kirkwood has surged to third in the standings, 75 points behind Palou, thanks to wins in the only three races Palou hasn't claimed. Kirkwood had just two wins in his first 53 series races. He now has three wins in the past six races. 'I think he's always been there,' Colton Herta said of his teammate heading into Sunday's XPEL Grand Prix at Road America Presented by AMR (1:30 p.m. ET, FOX, FOX Deportes, FOX Sports app, INDYCAR Radio Network). 'Maybe he's gotten a little bit better at how to race and when to go fast in races, and that just comes (with experience). But I think he's driving pretty similar to last year. He just had bad luck with penalties last year.' Kirkwood agrees the difference isn't raw speed but decision making. He cited last year's fifth-place finish at Road America as an example of when pushed too hard early in the race trying to stave off eventual third-place finisher Scott McLaughlin. The effort backfired and opened the door for McLaughlin and Palou to pass. 'I realized later it was inevitable,' Kirkwood said. 'I pushed too hard too early.' We'll see what he learned from last year. Dixon Penalized for Impeding DeFrancesco Six-time series champion Scott Dixon said he was trying to create a gap to maximize his chances of advancing in qualifying, but race officials said Dixon impeded the hot lap of Rahal Letterman Lanigan Racing's Devlin DeFrancesco during the first round of qualifying. The penalty proved costly to the Chip Ganassi Racing veteran. Rather than advancing to the Fast 12 and perhaps earning a top-10 starting position, Dixon lost his two fastest laps and was reduced to the 25th starting position. Only three times in his career has he started farther back, including 26th earlier this year in the Children's of Alabama INDYCAR Grand Prix at Barber Motorsports Park. He finished 12th in that race. 'It is what it is, man,' he said in ending an interview with FOX's Kevin Lee on pit road. recommended
