Alaska Railroad work train derails north of Talkeetna with no injuries
Jun. 7—An Alaska Railroad train derailed north of Talkeetna early Friday morning with no injuries reported.
Three crew members were aboard the work train at the time of the incident, according to a spokesperson for the railroad. The cause of the derailment was not immediately clear, they said.
Catherine Clarke, an Alaska Railroad spokesperson, said the derailment led to a puncture on the derailed locomotive's 2,600-gallon diesel fuel tank. The Alaska Department of Environmental Conservation is responding to the incident.
"The damaged fuel tank has been secured and initial containment strategies put in place, as efforts continue to remediate the impacted site," Clarke said by email on Friday afternoon.
Department of Environmental Conservation staff are coordinating with the railroad and other agencies on cleanup, officials said. In a situation report, DEC said Friday afternoon that the amount of fuel spilled "is unknown at this time."
The derailment took place just after 3 a.m., approximately 22 miles north of Talkeetna on the Curry loop track — a section of the railroad that provides access to a quarry and is not accessible by road, Clarke said.
The derailment occurred around 400 feet from the Susitna River. There are barriers between the fuel spill and river, DEC said.
"The nearest culvert leading toward the river has been secured and blocked as a precautionary measure. No reports of impacts to surface water have been reported. No wildlife impacts have been observed," the agency said in its situation report.
The Alaska Railroad typically transports around half a million passengers per year. The derailment was not expected to affect the railroad's main line, which operates trains between Fairbanks and Seward, Clarke said.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
2 hours ago
- Yahoo
Santa Fe 2926 gets approval to run on track outside Albuquerque for first time in decades
Jun. 20—People drive for miles to catch "raily" cool locomotive legends, such as Union Pacific's Big Boy No. 4014. They cheer and hug their loved ones as they listen to the click-clack of wheels on the tracks and watch plumes of steam blow into the air. People in Albuquerque experienced that magical moment in 2021 when the 1944 Atchison, Topeka & Santa Fe 2926 steam locomotive ran on its own power for the first time in over half a century. Those in neighboring communities, however, have not had that opportunity to see the 2926 . But that will change. The New Mexico Department of Transportation, New Mexico Rail Runner and New Mexico Heritage Rail have agreed to allow the ATSF 2926 to expand the amount of main line track it can run from about 3 miles to about 20 miles on either side of Albuquerque, between Bernalillo and Los Lunas, New Mexico Heritage Rail announced in a June 15 news release. "This is huge," said Mathew Casford, New Mexico Heritage Rail vice president and chief of rail operations. "This is the culmination of a dream that guys who were involved with this locomotive had way before I was involved." The expanded access applies to non-revenue deadhead moves — no freight or passengers — enabling the 2926 and its support equipment to travel for staging, maintenance and community outreach, the release stated. "This is exciting, really exciting," said John Taylor, Steam Locomotive & Railroad Society at-large board member. Taylor was one of dozens and dozens of people who helped restore the 2926. It is unclear, however, when people in Los Lunas or Bernalillo will be able to see the Santa Fe icon . "It could be within a year or two, if the stars align," Taylor said. "But there (are) a lot of stars." 'See what steam power is' The Santa Fe 2926 was built in 1944, and it was one of the last Class 2900 4-8-4 steam locomotives built by Baldwin Locomotive Works. "They were the engines for the war effort," Taylor said. "They were the engines for bringing freight. They were the engines for tourism, and they really turned New Mexico, essentially, into the state that she is today." After traveling a million miles, the locomotive was retired in Belen in 1955. A year later, it was donated to the city of Albuquerque, which put it in Coronado Park as part of the city's 250th anniversary celebration, he said. The Santa Fe 2926 sat in the park until 2000 when the Steam Locomotive & Railroad Society — doing business as New Mexico Heritage Rail — bought it for $1 and moved it to its current location, on 1833 Eighth NW, the restoration site for the 2926. Members of the society have put thousands of man-hours and dollars into refurbishing the locomotive. "It was rusty, covered with asbestos," Taylor said. "We stripped it down. We cleaned it up. We repaired everything, and we made it go, and we did it with volunteers." After two decades of restoration efforts, the Santa Fe 2926 ran under its own power for the first time on July 24, 2021 . In the past few years, the locomotive appeared at Tractor Brewing Company, Wells Park and the Rail Yards. But now, the Santa Fe 2926 will be able to go as far as Los Lunas. "To let the people see what steam power is and what it represents is a really important thing," Taylor said. New Mexico Heritage Rail is developing operating schedules in coordination with New Mexico Rail Runner to ensure a "seamless integration with existing freight and passenger services," according to a news release. "These practice runs will allow the organization to test equipment, train crews, and demonstrate consistent, safe operations — essential steps before any public trips can be offered," the release stated. "This is going to be a persistent, slow process," Casford said. In the meantime, people can see the 2926 at the restoration site from 9 a.m. to 2 p.m. Wednesdays and Saturdays or during New Mexico Railroad Days the last weekend of September. "This isn't just a locomotive," Casford said, "it's a rolling classroom and a tribute to the people and industry that helped shape New Mexico."
Yahoo
7 days ago
- Yahoo
Construction starts Monday at Longmont's Ninth Avenue railroad crossing
Construction is scheduled to begin Monday at the Ninth Avenue railroad crossing between Collyer and Baker streets, for Longmont's Railroad Quiet Zones Project. One lane of traffic on Ninth Avenue will be closed in both directions across the railroad crossing for approximately four weeks. Additional intermittent lane closures may be required until construction at the crossing is complete at the end of August, according to a city news release. A 'quiet zone' is a section of railroad in Longmont where trains do not routinely sound their horns at road crossings. However, multiple adjacent crossings will need to have safety improvements, before a full quiet zone can be designated. The city noted that residents may still hear train horns after construction is completed at these crossings, until the other adjacent crossings are also completed. This is part of the first group of crossings to receive safety improvements that will eventually be designated as a Quiet Zone through downtown Longmont. The other crossings in this group include 17th Avenue, Longs Peak Avenue/Atwood Street and Third Avenue/Atwood Street. Regular construction hours are Monday through Friday from 7 a.m. to 5 p.m. Some work may occur until 7 p.m., and also on Saturdays and Sundays, as necessary, according to the release. Detour signs will direct vehicle and pedestrian traffic to alternate routes, as needed. In some cases, a full closure of the railroad crossing is required. For more information, visit the Quiet Zones in Longmont webpage. Questions or concerns regarding the project should be directed to the project hotline by calling 720-526-2044 or emailing QuietZones@
Yahoo
7 days ago
- Yahoo
An Anchorage man remains lost in the Susitna River. His family is searching for answers
Jun. 13—PALMER — Three months after two workers went missing in the Susitna River, their families say they still have more questions than answers despite a report that includes accounts from three other workers who survived. Sean Kendall and Skye Rench were riding in a side-by-side the morning of March 6 when the ATV punched through the river ice and sank. Three others managed to escape but Rench and Kendall were swept under. Rench's body was spotted by a private pilot on May 22 and recovered. His father, Thomas Rench, said he spent 77 days and thousands of dollars searching when others stopped, only to have "a stranger" find his son. Kendall has not been found. The Alaska Dive Search Rescue and Recovery Team returned to the river in early June but found no indication of the missing man or the side-by-side. Kendall's brother-in-law, Pete Caruso, flew the area on June 6 but saw no sign of the missing man. "This'll be the third time I've flown in search since they found Skye. I 100% want to find him," Caruso said the day before the flight. "The hard part, to be honest ... is at the end of the flight when you don't find nothing." 'No business being out there' The men had just gotten off a 12-hour shift with Alaska Directional LLC installing a Matanuska Telecom Association underground fiber-optic cable from Point MacKenzie to Tyonek. The remote job was complicated by a low-snow winter with spells of unseasonable warmth that led to unpredictable ice conditions. Skye Rench, a 32-year-old from Wasilla engaged to be married this summer, had just completed his rookie Iron Dog snowmachine race in February. Kendall, a 42-year-old from Anchorage with a teenage son, was an avid snowmachiner. It remains unclear why a group of men so experienced in the Alaska outdoors would choose the route they did given the questionable ice, while working a job covered by state permits and workplace regulations. "Them guys had no business being out there in a side-by-side," Thomas Rench said. The federal Occupational Safety and Health Administration is investigating the incident. So is the International Brotherhood of Electrical Workers, the men's union. Neither investigation has been publicly released. Kendall's brother and brother-in-law say the state missed opportunities to enforce work permits that appear to have banned the use of ATVs to access the job site. Alaska Department of Fish and Game permits banned overland travel without adequate snow and ice cover. "No one's asking how this happened," said Kendall's brother, Dave Kendall. "There's two people that are dead. OSHA's only going to look at it as a workplace accident. At the end of the day, something led up to this. Something happened ... a decision was made." Palmer-based Alaska Directional is owned by Bristol Bay Industrial LLC, which is affiliated with Bristol Bay Native Corp. Alaska Directional responded to a number of questions for this story with a statement: "We are deeply saddened by the tragic incident that occurred on Thursday, March 6. Our thoughts and heartfelt condolences are with the families, loved ones, and colleagues of those affected. The safety of our colleagues, contractors, and everyone else we meet in our work is our number one priority. We continue to cooperate with investigating authorities." Survivor accounts While no investigative findings have been released regarding the March 6 incident, an Alaska State Troopers report includes accounts with the three survivors that provide new information about the moments around the sinking. That morning, the report said, the five workers climbed into an enclosed cab Polaris Ranger for the hourlong trip to a Point MacKenzie parking lot and the drive home. Troopers say they were alerted to a problem by a 911 call just before 9 a.m. Interviewed at Alaska Directional's Palmer offices about six hours later, one of the survivors said the crew had been using an ice road to cross the Susitna but opted to travel upriver to an Enstar pipeline trail because the ice road "was becoming rough and rutted up," the incident report said. The side-by-side was going about 30 mph when the rear tires broke through the ice, another survivor said. He said "the crew believed the open water to be water on the ice from the tide," the report said, though he also described seeing open water farther downriver. Rench and Kendall were sitting in the back, according to the survivor accounts. The driver was initially trapped but managed to get the window open and escaped into the water, the report said. The front passenger was able to jump out, push off the sinking side-by-side "and make his way onto the ice," it said. Another man in back crawled into the front and ended up in the water. The Ranger sank with Rench and Kendall inside, but the survivors described seeing them surface, according to the report. One survivor said he tried to rescue the men and grabbed Kendall but couldn't get him onto the ice before he went under, the report said. Rench was already underwater at that point, he told troopers. The men said they lost sight of Kendall and Rench and started making the roughly 2-mile walk back downriver to a work camp, according to the report. They were picked up by a helicopter that morning. More losses to bad ice A few weeks after the ATV went into the river, Alaska Directional lost a piece of equipment in the ice as work continued amid spring breakup conditions. State officials have said Alaska Directional's operations put MTA out of compliance with permits required to work within the Susitna Flats State Game Refuge. In late March, Alaska Directional received emergency approval to remove the sunken loader and barge out other heavy equipment that couldn't be removed overland due to deteriorating conditions. Fish and Game did not initiate any enforcement actions at the time but instead chose to work toward permit compliance, officials have said. Kendall's brother and brother-in-law question why the agency didn't do more to push for compliance over the winter — or even shut it down. Fish and Game did not enforce permit violations before March 6 despite the lack of ice or snow cover, Caruso said. And then when the loader went into the ice, officials "moved the goalpost" to avoid assessing any penalties, he said. Sarah Myers, area habitat biologist with Fish and Game, declined to respond to comments from the families about anything not specific to permits. Under an agreement arrived at with MTA and Alaska Directional, the equipment left along the Susitna was supposed to be removed by June 14, Myers said. MTA has requested an extension for removal until June 30 "for the barge to be able to work with the tide schedule," she said in a June 4 email.
