Speed limit likely to rise for heavy vehicles on Mumbai-Pune Expressway's ghat stretch
Heavy vehicles descending the Bhor Ghat section of the
Mumbai-Pune Expressway
might soon move down the slope a bit faster, with authorities considering an increase in the existing speed limits, officials and transporters have said.
Deliberations are underway to raise the speed limit for heavy vehicles like trucks and buses from the current 40 kmph to 45-50 kmph on the downward incline of the Pune-Mumbai arm, also known as the Khandala Ghat. A decision is likely to be taken soon, they said.
The current speed limit of 60 kmph for cars in the 10-km ghat section is unlikely to be changed. On other stretches of the country's first access-controlled expressway, the speed limit is 100 kmph for smaller vehicles and 80 kmph for heavy vehicles.
The current limit on the ghat section, located between Lonavala in Pune district and Khalapur in Raigad district, results in frequent e-challans as it is challenging for heavy vehicles to move slowly on a sharp downward incline, slows down traffic and causes accidents, they claimed.
After follow-ups and discussions, the authorities have given a positive signal for an upward revision of the speed limit, transporters said.
According to transporters, particularly bus owners, e-challans have increased on the ghat section following the introduction of the
Intelligent Traffic Management System
(ITMS), which comprises several speed-monitoring cameras and other equipment, on the 95-km carriageway.
A vehicle is fined Rs 2,000 for the first speed violation, and the amount increases for subsequent infractions.
Teams from the Maharashtra State Road Development Corporation (MSRDC), highway police, the state transport department and transporters conducted a joint survey of the ghat section last month to assess the ground reality.
The transporters and a few officials called the current speed limit of 40 kmph for heavy vehicles on Bhor Ghat "unscientific", "unrealistic" and "unfair". Allowing these vehicles to move a bit faster would save time, fuel, maintenance costs and help avoid "unnecessary" e-challans, they said.
Harsh Kotak, a bus operator and leader of the Mumbai Bus Malak Sangh, explained the practical aspect of the challenges faced by drivers.
"In special gear, vehicles can only reach speeds of 7-10 kmph, while it's 25-28 kmph in first gear and 45-47 kmph in the second gear. But if you stay in first gear for too long, the vehicle crawls and disrupts traffic. In the second gear, you either overshoot the speed limit or end up overheating the brake drum due to excessive braking," he said.
Kotak said they have requested the authorities to "scientifically" set the speed limit at 50 kmph. "Around 30 per cent of the e-challans are issued to heavy vehicles on this 10-km ghat stretch, often for speeds between 43 and 50 kmph," he added.
KV Shetty, another bus operator, claimed there are no proper warning signs to alert drivers in advance to slow down.
"Sudden braking often leads to accidents. The government calls it an expressway, but expects vehicles to run at 40 kmph," said the bus operator.
Maharashtra Transport Commissioner Vivek Bhimanwar told PTI that they have received several complaints from transporters concerning the speed limits.
He called the concerns valid as it is "practically difficult" for heavy vehicles to maintain such low speeds on the sharp downward slope.
"MSRDC is the agency responsible for decisions regarding the ghat section, while the highway police will finalise the speed limit," Bhimanwar said, adding that his department has already written multiple letters to the highway police.
Additional Director General of Police (Highway) Pravin Salunkhe could not be reached for comment despite repeated attempts.
However, an MSRDC official said the highway police were expected to convene a meeting to discuss the upward revision in the speed limit.
Named after former chief minister Yashwantrao Chavan, the expressway was opened to traffic in 2002. It saw 191 accidents in 2024, according to official figures.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Time of India
5 hours ago
- Time of India
‘Cracks' on flyovers raise alarm, officials say no threat
Ranchi: 'Cracks' on the Kantatoli and Siramtoli flyovers have raised safety concerns among commuters, prompting quick inspection and intervention by the road construction department (RCD). These 'cracks', seen as lines along the walls with soft material protruding in some places, led to speculation about structural flaws. However, officials clarified that these are expansion joints, a critical design feature in large concrete structures, and pose no structural threat. "An expansion joint is a deliberate gap left between sections of concrete to allow for thermal expansion and contraction due to temperature changes. The gap is often filled with compressible materials like thermocol or foam to absorb movement. In the case of 2.24-km long Kantatoli flyover, built at a cost of Rs 224 crore, commuters observed thermocol dislodging from the joints before the Kokar ramp, which caused concern," Sunil Kumar, secretary of urban development and housing department (UDHD) and RCD, said. "The material seen coming out is thermocol, used in expansion joints to accommodate thermal expansion of the flyover structure. by Taboola by Taboola Sponsored Links Sponsored Links Promoted Links Promoted Links You May Like 5 Books Warren Buffett Wants You to Read In 2025 Blinkist: Warren Buffett's Reading List These joints are not construction flaws but essential engineering provisions. The flyovers are safe," he added. Kumar further added that engineers inspected the site and found no signs of structural damage. "The remedy involves re-inserting the thermocol and covering the joint with protective paint. There is no risk to public safety. The Siramtoli flyover, which is 2.34 km long and built at a cost of Rs 255 crore, has a 100-year design life. We have provisions for thorough maintenance every 10 years," he added. Commuters using the Siramtoli flyover had recently flagged concerns about loose and protruding screws on a speed-breaker. On Sunday, the road construction department deployed engineers to address the issue. The screws were re-tightened and secured with industrial-grade adhesive to prevent recurrence. "It felt risky driving over the bump with metal parts sticking out. Two-wheeler riders like me were especially worried about skidding. We're relieved the authorities took quick action," said Rajeev Sinha, a daily commuter who uses the flyover to reach Doranda from Lalpur, said. In response to complaints about protruding nails from a speed-breaker on the Siramtoli stretch, RCD engineers carried out immediate repairs on Friday. "The screws were tightened and industrial adhesive applied to ensure they don't come loose again," said Kumar.
Time of India
5 hours ago
- Time of India
NDMC eyes overhaul of Lutyens' Delhi avenue roads post monsoon
New Delhi: To improve road infrastructure in Lutyens' Delhi, New Delhi Municipal Council (NDMC) is set to begin a comprehensive revamp of 79 avenue roads. The initiative will be guided by a detailed Visual Distress Survey conducted by CSIR-Central Road Research Institute. The project, currently in its final tendering phase, will begin after the monsoon, tentatively in Oct 2025, and is expected to be completed by March 31, 2026, at an estimated cost of Rs 92 crore. "We'll deploy the latest technology for the work. The tendering process is nearly complete," said NDMC vice-chairman Kuljeet Chahal. "CRRI has identified various issues, including cracks and surface deterioration, and assessed their severity and spread across the road network." The survey, commissioned under an MoU signed last year, focused on roads where the bituminous layer has exceeded its typical five-year lifespan. CRRI's assessment included not only a visual inspection but also technical procedures such as roughness surveys and extraction of bituminous cores from selected stretches to study subsurface cracking. Based on these findings, the final recommendations propose strengthening measures, including milling to remove worn asphalt layers and laying new overlays. by Taboola by Taboola Sponsored Links Sponsored Links Promoted Links Promoted Links You May Like Learn Online Without the High Tuition SearchMore Learn More Undo The scope of the project includes a full assessment of existing pavement conditions, crack analysis, measurement of ride quality, calculation of pavement condition index and formulation of optimal milling and resurfacing strategies. CRRI will also provide technical oversight during the execution phase to ensure quality control and long-term maintenance. According to senior NDMC officials, the 79 roads have been grouped into six divisions, with bitumen work planned in phases to cover all radial routes. The objective is to ensure that roads remain in good condition for the next five years. In the Connaught Place division, eight major roads were surveyed, including Outer Circle Road, Panchkuian Road (up to SBS), BKS Marg, Sansad Marg, Janpath, KG Marg and Inner Circle Road. The R-I division covered 18 roads, including Atul Grove Road, Dr Rajendra Prasad Road, Jai Singh Road, Janpath (between Connaught Place and Rajendra Prasad Road), Shrimant Madhav Rao Scindia Marg, Bhagwan Das Road, Sikandra Road, Safdar Hashmi Road and Copernicus Marg. In the R-II division, 21 roads such as APJ Abdul Kalam Road, Max Muller Marg, Humayun Road, Archbishop Marg, Aurobindo Marg, Khanna Market Road and Lodhi Estate were included. R-IV division had 28 roads identified for upgrades, including Sardar Patel Marg, Dharma Marg (between Kautilya Marg and SP Marg) and S Radhakrishnan Marg. In the R-V division, four stretches like Pandit Pant Marg and Kali Bari Marg were selected for the survey. CRRI chief scientist Sunil Jain emphasised the need for milling on all roads prior to overlay treatment. He noted that in specific areas like Golf Link Road, where adjacent zones experienced heavy waterlogging during the last monsoon, the agency recommended milling to a depth of 150–160 mm followed by a 40 mm bituminous concrete layer, effectively lowering the road level by 120 mm to enhance drainage and reduce flooding risk.
Time of India
6 hours ago
- Time of India
Kolkata metro railway using sustainable braking technology to reduce carbon emissions: Official
The Kolkata metro railway has started using a sustainable braking technology in its rakes, as part of its quest to reduce carbon emissions and save energy costs, an official said on Sunday. All the new rakes that are being introduced in the city's rapid transit system feature ' Regenerative Braking ', he said. "The technology allows a train's electric motors to operate in reverse (like a generator) during braking, leading to conversion of the train's kinetic energy back into electrical energy, rather than wasting it in the form of heating of wheels or brake shoes," a Metro Railway Kolkata spokesperson said. by Taboola by Taboola Sponsored Links Sponsored Links Promoted Links Promoted Links You May Like Mini House for 60 sqm for Seniors with Toilet and Bath (Click Here) Pre Fabricated Homes | Search Ads Search Now Undo At present, the Kolkata metro railway operates 37 rakes with regenerative braking features. "The total energy regenerated in the year 2024-25 - by usage of the system in 37 rakes - has been 1.08 crore units, which have saved around Rs 8.2 crore in energy cost," he said. Live Events Regenerative braking has reduced carbon emissions by 13,500 tonnes in the previous financial year, the official said. In a study conducted by Metro Railway Kolkata, it has been observed that 17-20 per cent regeneration of electricity is possible, he said. "This is a step forward for saving energy and reducing the use of fossil fuel. Urban metro systems like those in London, Tokyo and New York also use regenerative braking," the spokesperson said. "The unique advanced 'Regenerative Braking System' technology reduces wear and tear of brake, wheel, brake disc as well as maintenance costs," he said. In another green initiative, Metro Railway Kolkata has taken up the work of setting up a 4-MW 'Advanced Chemical Cell (ACC)' battery storage system, "which is the first of its kind in Indian Railways ". The batteries have arrived and the system is expected to be operational in the middle of July, 2025, he added.
