When Bolton went all-American with the first drive-through in the UK
Today you will find drive-throughs in every town in the country.
Starting out as the preserve of burger chains, the UK is now full of businesses where you can be served without leaving your car.
It is used by coffee chains like Costa and Starbucks, street food such as Chaiiwala and even posh bakery chain Gail's is looking at opening drive-throughs for those who need their sourdough pronto.
But there was a time when this was not the case.
Henrys, the first drive-through in the country, before its opening. Taken in October 1980 (Image: Newsquest) The very first drive-through in the country was only established in 1980, in our very own Bolton.
Henrys opened its doors in November of that year on Derby Street, long before McDonald's came along on the same road.
The restaurant was known for its fish and chips and pies, but its American diner decor was matched by its menu, and customers could also indulge themselves in burgers and banana shakes.
It was featured in a BBC package in 1981, exploring the alien concept of drive-throughs.
Did you know that the country's first ever fast food drive-through was in Bolton? 🤔 It was called Henrys and was featured on an episode of the BBC1 programme Home Front in 1981. We're looking back at the film as part of our Rewind series, celebrating 100 years of the BBC. ⬇️ pic.twitter.com/9PlVTsdCAT
— BBC North West (@BBCNWT) September 27, 2022
In the piece by legendary TV reporter Brian Redhead, drivers are also shown to be given a branded Henrys car sticker.
Mr Redhead says: 'A Henrys automated chippery on Bolton's busy Derby Street, technology has added several brand new dimension to the noble bag of fish and chips.
Read more: UK's first drive-thru opened in Bolton - serving up fish and chips
Read more: Wanderers Burnden Park ground pictured covered in adverts!
Read more: Bolton Market Place photos show shopping centre just after opening
"Fish if you want it, but statutory seven ounce portions of chips with everything, from peas and pies to burgers and banana shakes.
'At the North West's first drive-in chip shop it's simply a matter of placing your order at one window and steering a steady course to another while it's being rapidly dispensed.
Henry's dining room, November 1980 (Image: Newsquest) 'Then all you have to do is pay.'
A fee of £1.99 is exchanged for one Henrys burger, chips and mushy peas, and one portion of fish and chips, accompanied by a 'shake'.
'You don't even have to shake your own salt and vinegar, they come in plastic sachets,' Mr Redhead ends by saying.
Henrys was also the first restaurant in the UK to introduce a braille menu, so people with visual impairments could order too.
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Newsweek
2 hours ago
- Newsweek
IndyCar Unveils the 2028 Race Car
Based on facts, either observed and verified firsthand by the reporter, or reported and verified from knowledgeable sources. Newsweek AI is in beta. Translations may contain inaccuracies—please refer to the original content. IndyCar announced the new car for the 2028 season, which will be ready for testing in 2026. The American racing series revealed the new race car while at the Road America track ahead of the XPEL Grand Prix. Dallara is producing the new chassis for the car, continuing as the exclusive chassis for IndyCar as it has since 2008. The series officials plan on the new design improving the racing throughout all four track types and pushing the car's development further. "The time has come for a new NTT INDYCAR SERIES chassis," INDYCAR President Douglas Boles said in a statement. "The DW12 served the series so well, as it provided a combination of phenomenal, wheel-to-wheel racing and critical enhancements to safety. "But recent significant updates to the car - from the aeroscreen to the hybrid power unit - have helped advance the need for a completely new car. "We are pleased by what our engineers and Dallara have collaboratively designed and believe it will appeal to the fans and paddock while also upholding our standards of safety and enhancing INDYCAR's on-track competition well into the future." The 2028 car features a projected weight of 85-100 pounds compared to the current model. The engine is going to become a 2.4-liter twin-turbocharged V-6 internal combustion engine, which should be more powerful. Scott McLaughlin, driver of the #3 Dex imaging Team Penske Chevrolet drives during the NTT INDYCAR Firestone Grand Prix of St. Petersburg on March 02, 2025 in St Petersburg, Florida. Scott McLaughlin, driver of the #3 Dex imaging Team Penske Chevrolet drives during the NTT INDYCAR Firestone Grand Prix of St. Petersburg on March 02, 2025 in St Petersburg, Florida. Photo by Miguel will create the power supply as it has since 2000. They designed the engine to be 25 pounds lighter and to use more electrical power. The new model is still not set, as the designers and engineers are still rounding out the rough edges of the design. IndyCar stated that further details and renderings of the design are yet to come. It is unclear when the timeline for its unveiling will. While the features and promise of the new car sound nice, there is still much to be learned from testing to see if it can deliver better racing than the current generation of cars. IndyCar's European competitor, Formula 1, introduced a new set of regulations in 2022, which promised better racing, but the cars are creating more dirty air than ever, making it harder for cars to follow others. If they manage to develop a meaningful improvement over the current car that races better across the different tracks, the series' unique tracks could shine more, setting it apart from any other motorsport in the world and continuing to compete with F1.
Miami Herald
8 hours ago
- Miami Herald
This Gorgeous, 1-of-26, Piece of American Automotive History Can be Yours on BaT
The 1950s were a hotbed for independent automotive innovation. It was a time when lax rules and regulations meant that automakers and regular Joes could create what they thought was the next best American automobile. Although already an established name by that time, Hudson was not averse to embarking on new projects. One of those new projects gave birth to what I strongly believe to be one of the most unique cars to have ever seen the blacktop, and one of them is now for sale on Bring a Trailer. The Hudson Italia was created when Hudson's chief designer, Frank Spring, saw the publicity Chrysler had created with their Ghia-bodied creations. The Italia was bodied by the Italian Touring Supperleggera coachbuilding company, with some unique touches that truly gave it a jet-era look that would fit right at home in the Jetsons. The bodywork featured an inverted "V" centered in the front bumper, V-shaped brake-cooling scoops above the headlights, a wraparound windshield, brake-cooling scoops, upper door edges contouring into the roofline, and triple chrome tubes recessed into the rear fenders for the rear lights. A prototype was shown at various Hudson dealers around the country, with just 25 other examples produced between 1954 and 1955 before Hudson merged with the Nash-Kelvinator Corporation to form American Motors Corporation. This particular 1954 example, chassis 10007, was reportedly displayed at the 1954 Paris Motor Show before moving to Sweden in July 1955 with its first owner. It saw several more owners throughout the 1970s before another Swedish owner kept it for 22 years. It was later purchased by its current owner and imported to the US in 1999. Its 202ci Twin-H L-head inline-six was overhauled in 2011, and replacement twin Carter carburetors were installed. The bodywork was left unpainted and shows numerous patina scars, including dents, patches, primer, and a damaged windshield. It is also unfortunately missing its bumpers, which adds a tremendous amount of style to the car. The car retains its column-shifted three-speed manual transmission, four-wheel hydraulic drum brakes, independent front suspension, as well as its red and black leather upholstery that was reportedly re-dyed. Matching red carpeting was seemingly installed, but the dashboard and terrific-looking, wrapped two-spoke steering wheel remain intact. It sits on factory 15" Borrani wire wheels with wide whitewall tires that will absolutely need replacing. The odometer currently shows around 61,000 miles. Space-age, jet-era, regardless of what you want to call it, the time period of the Hudson Italia gave birth to some truly stunning moving art. As much as seeing this car in a shiny, period-correct paint job would be stunning, preserving it in its current worn state entices me more. Cars are only original once, and erasing the dents and scratches that help tell this piece of history's story is almost a tragedy to me. Regardless, the Bring a Trailer auction ends in 5 days with a current bid of a mere $10,000. The seller claims that many spare parts come with the car and that they have even 3D-scanned a fully restored Italia that the future owner of this one can use to make parts. It is definitely a daunting project, but how often do you get such a chance? Copyright 2025 The Arena Group, Inc. All Rights Reserved.
Time Business News
a day ago
- Time Business News
Garage Chaos to Clean Setup: Smarter Storage for Skis and Boards
If you ski or ride, you already know: gear piles up fast. One board becomes three. A couple of skis become a quiver. Add boots, poles, gloves, and suddenly your garage turns into a chaotic mess of leaning gear and tangled edges. Most people just prop their gear against a wall or toss it in a corner—until it starts falling over, getting scratched, or warping out of shape. If you are serious about keeping your equipment dialed, a proper ski rack garage setup isn't just about saving space. It's about protecting performance. That's exactly what Rocker Ski Rack, based in Ashland, Oregon, is built for. Skis and boards don't just get damaged on the hill—they take hits in the off-season too. Letting them lean against a wall in your garage might seem harmless, but over time it can: Flatten your camber or rocker profile Create pressure points that weaken flex Trap moisture near bindings or edges Cause scratches, dings, or even delamination A simple fix? Get them off the floor. Rocker's snowboard holder for wall and ski racks mount directly into your garage studs, holding gear vertically, evenly supported, and away from damage. It's clean, functional storage that keeps your gear ready, not wrecked. Unlike plastic racks or makeshift DIY solutions, Rocker racks are made to do one thing, and do it well. Each snowboard holder for the wall and ski rack is handcrafted from powder-coated American steel, built to resist rust, corrosion, and garage wear. The arms are rubber-coated, so you are not grinding your edges or scraping your top sheets every time you rack or remove your gear. Everything sits gently, securely, and out of harm's way. They are simple. They are solid. And they are built to last longer than anything else in your garage. Whether your space is tight or you have got a full wall to work with, Rocker's racks are designed for straightforward installs and serious function. Each rack is: Stud-aligned (16' or 24') so you can mount it right into your wall without guesswork Shipped with mounting hardware and clear instructions Designed to be installed once and trusted for years Options include: Single Rack – Ideal for small garages or entryways Triple Rack – Three skis or boards, mounted on a wood backplate Quad Rack – Four arms, plus you can also hang helmets, gloves, or goggles Six Pack – For serious setups, cabins, or large families with a lot of gear No sagging, no leaning, no tripping over gear anymore. Rocker racks don't just store your gear—they make your garage look like it belongs to someone who rides. The matte black steel arms and stained hardwood backplates give a clean, organized look that feels more like a display than a storage unit. They are not flashy. They are functional. And they turn garage clutter into something that actually looks good on your wall. Every rack is handmade in Ashland, Oregon, by people who ride. You won't find particle board or off-the-shelf parts here—just tough, thoughtful design built for winter. Your skis and boards are built to ride. But how you store them in the garage matters just as much as how you treat them on the mountain. A proper ski rack garage setup or snowboard holder for the wall from Rocker gives your gear the protection it deserves, keeping it upright, dry, and damage-free all year long. Powder-coated steel. Rubber-coated arms. Stud-aligned install. Made in USA. This is the storage your gear should have had from day one. TIME BUSINESS NEWS
