Amer Sports reports a 23% revenue surge in Q1 2025, boosted by Asian market
Outdoor lifestyle group Amer Sports maintained positive momentum from January to March in the first quarter of 2025, with revenue reaching $1.473 billion (1.3 billion euros), up 23% year-over-year (+26% at constant currency). The results were driven by a strong performance from its two flagship brands, Arc'teryx and Salomon.
Also the owner of Wilson, Peak Performance and Atomic, Amer Sports divides its revenue across three segments. The Technical Apparel division, led by Arc'teryx, posted a 28% increase to $664 million. The Outdoor Performance segment, driven by Salomon and its female-focused products, grew by 25% to $502 million. Meanwhile, the Ball & Racquet Sports division, which is heavily concentrated in Asia, rose by 12% to $306 million.
Revenue in Asia rises by over 40%
The group experienced growth across all global regions. The Americas region climbed from $415 million to $465 million (+12%), while the 'Greater China' zone (mainland China, Hong Kong, Macau and Taiwan) rose from $312 million to $446 million (+43%). In the Europe-Middle East-Africa (EMEA) region, revenue grew by 12%, from $360 million to $405 million. The Asia-Pacific region (excluding 'Greater China') posted a particularly strong 49% increase, rising from $105 million to $157 million.
The Greater China region was a key topic during the company's analyst call on Tuesday, May 20. Salomon, known for its premium outdoor products, is gaining more customers in the market, especially with its footwear. Amer Sports plans to expand in China by shifting from wholesale to owned retail, opening 'larger stores.' Wilson also appears to hold strong potential in the region.
Regarding distribution channels, direct-to-consumer (DTC) saw the highest growth, reaching $693 million (+39% compared to Q1 2024). Wholesale rose by 12% in the same period to $780 million.
For the first quarter, Amer Sports reported net income of $135 million, a sharp increase from just $6.9 million in 2024. Its gross margin rose by 350 basis points to 57.8%.
Mitigating tariff impact
Following these results, the group raised its full-year forecast. Assuming stable U.S. tariffs, Amer Sports is now targeting 15–17% growth, up from 14–16% at the end of fiscal 2024.
Group CFO Andrew Page offered reassurance regarding tariff impacts: 'Given the mitigation strategies we've already implemented, we believe the impact of higher tariffs on our income statement will be negligible this year. And as we've said before, if strong trends continue and demand exceeds expectations, we believe we are well-positioned to deliver financial results above our current outlook.'
With products sold in more than 100 countries, Amer Sports employs 13,400 people worldwide and generated revenue of $5.2 billion in fiscal 2024.
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Sustainability Times
10 hours ago
- Sustainability Times
'Germany Goes Fusion-First': Company Pushes Bold Plan to Build World's First Operational Nuclear Fusion Power Plant
IN A NUTSHELL 🔋 Proxima Fusion secures $150 million in Series A funding to develop a commercial fusion power plant. secures $150 million in Series A funding to develop a commercial fusion power plant. 🏗️ Significant funding is allocated to achieving engineering milestones, including the Stellarator Model Coil by 2027. by 2027. 🌍 The company is finalizing the location for its demonstration stellarator, ' Alpha ,' set to begin operations in 2031. ,' set to begin operations in 2031. 🛠️ Proxima Fusion introduces the 'Stellaris' concept, a peer-reviewed stellarator design leveraging high-temperature superconducting technology. With the world on the brink of an energy revolution, the focus has shifted dramatically towards technological innovations that promise sustainable and abundant power. One such pioneering endeavor is led by Proxima Fusion, a Munich-based start-up determined to harness the power of nuclear fusion. Recently securing $150 million in its Series A financing round, bringing its total funding to over $213 million, Proxima Fusion is making significant strides toward constructing a commercial fusion power plant using the stellarator design. This bold initiative not only signals a shift from traditional energy resources but also positions Proxima Fusion at the forefront of technological leadership in global energy. Engineering Milestones and Strategic Goals A significant portion of Proxima Fusion's new funding is dedicated to achieving specific engineering and development milestones. The primary objective is the completion of the Stellarator Model Coil (SMC) by 2027. This project serves as a crucial hardware demonstration aimed at de-risking the application of high-temperature superconducting (HTS) technology in stellarator designs. Such advancements are pivotal in fostering innovation across Europe. Proxima Fusion's approach is defined by a simulation-driven engineering strategy that integrates advanced computing to refine its designs. This methodology is instrumental in overcoming complex challenges associated with fusion technology. 'Fusion has become a real, strategic opportunity to shift global energy dependence from natural resources to technological leadership,' remarked Francesco Sciortino, CEO and Co-founder of Proxima Fusion. The engineering efforts are not just about achieving technical success but also about paving the way for a sustainable energy future. China Caught Off Guard as U.S. Unleashes Liquid Uranium Rocket to Conquer Mars with Unmatched Nuclear Speed Finalizing the Alpha Demonstration Stellarator In tandem with engineering advancements, Proxima Fusion is in the process of finalizing the location for its demonstration stellarator, aptly named 'Alpha.' This facility is a critical component of the company's roadmap, designed to demonstrate a net energy gain (Q>1), which is essential for the development of a functional fusion power plant. Set to commence operations in 2031, Alpha represents a significant step toward realizing commercial fusion energy. Negotiations are currently underway with several European governments to determine the most suitable site for this facility. Established in April 2023 as a spin-out from the Max Planck Institute for Plasma Physics, Proxima Fusion operates within a public-private partnership, leveraging the experimental outcomes from the IPP's Wendelstein 7-X stellarator. This collaboration underscores the importance of partnerships in advancing groundbreaking technologies. 'Space Needs Nuclear Now': This New Global Race to Harness Atomic Power Beyond Earth Is Accelerating Faster Than Expected Revealing the Concept of 'Stellaris' Proxima Fusion has introduced the 'Stellaris' concept, a robust, peer-reviewed stellarator design that integrates physics, engineering, and maintenance considerations from the onset. The Stellaris concept focuses on quasi-isodynamic (QI) stellarators, which are seen as a promising path to commercial fusion energy. By utilizing HTS technology, Stellaris can generate stronger magnetic fields, allowing for the construction of smaller, yet highly efficient stellarators. Stellaris is designed with materials readily available within the current supply chain, mitigating potential delays from awaiting new technologies. This strategic decision is crucial for maintaining project timelines and achieving near-term goals. The comprehensive peer-review process and supportive simulations affirm Stellaris's capability to address known limitations in stellarator development, positioning Proxima Fusion as a leader in fusion energy innovation. 'Reactor Has a Mind Now': U.S. Nuclear Plants Given Digital Twins That Predict Failures Before They Even Exist The Road Ahead for Proxima Fusion Looking forward, Proxima Fusion's journey is marked by ambitious goals and strategic planning. The recent influx of funding is a testament to the confidence investors have in the company's vision for a sustainable energy future. As Proxima Fusion advances toward its hardware and site selection goals, it continues to build on its strong foundation of engineering excellence and innovative design. The fusion industry, while challenging, offers immense potential for transforming global energy systems. With Proxima Fusion at the helm, the quest for fusion energy is not just a dream but a tangible reality within reach. What will the future hold for this groundbreaking technology, and how will it redefine the global energy landscape? Our author used artificial intelligence to enhance this article. Did you like it? 4.5/5 (27)
Sustainability Times
a day ago
- Sustainability Times
'1,800 Horsepower Unleashed': Bugatti Tourbillon's V16 Engine Screams to 9,000 RPM in Unprecedented Hypercar Debut
IN A NUTSHELL 🚗 Bugatti Tourbillon features an innovative V16 engine, developed with Cosworth, delivering 1,800 horsepower. features an innovative V16 engine, developed with Cosworth, delivering 1,800 horsepower. 🔋 The car integrates a sophisticated hybrid system , developed with Rimac, enhancing performance with three electric motors. , developed with Rimac, enhancing performance with three electric motors. ⚡ A 24.8-kWh battery provides over 37 miles of electric-only range, showcasing Bugatti's commitment to efficiency. 🏎️ Currently in its Validation Prototype phase, the Tourbillon is set to redefine hypercars with its unique blend of power and technology. In the world of hypercars, Bugatti has consistently pushed the boundaries of what is possible. With the unveiling of the Bugatti Tourbillon, the storied automaker has once again redefined the limits of performance and innovation. This new model, which succeeds the Chiron, boasts an awe-inspiring V16 hybrid powertrain. Developed in collaboration with engineering specialists at Cosworth and Rimac, the Tourbillon is designed to set new standards in the automotive industry. With a combined output of 1,800 horsepower from both the combustion engine and electric motors, the Tourbillon promises to deliver a driving experience unlike any other. Revolutionary V16 Engine: The Heart of the Tourbillon At the core of the Bugatti Tourbillon lies a groundbreaking 8.3-liter V16 engine, meticulously crafted in partnership with Cosworth. This engine is a departure from the quad-turbocharged W16 engines used in previous models like the Veyron and Chiron. Instead, Bugatti has opted for a naturally aspirated configuration, allowing the engine to reach a redline of 9,000 RPM. With 1,800 horsepower at its disposal, the V16 engine is a testament to Bugatti's commitment to engineering excellence and performance. Bugatti's decision to collaborate with Cosworth highlights the company's dedication to incorporating cutting-edge engineering solutions into its vehicles. The naturally aspirated design not only provides exhilarating power but also enhances the overall driving experience by delivering an unmistakable engine note. This bold move underscores Bugatti's belief that the Tourbillon will redefine the hypercar landscape, offering a thrilling combination of power, performance, and innovation. 'Bury Them Deep': Nuclear Reactors Planted One Kilometer Underground Could Deliver Cheap and Ultra-Safe Energy for Decades Hybrid System Integration: Enhancing the Driving Experience In collaboration with Rimac, Bugatti has seamlessly integrated the V16 engine into a sophisticated hybrid system. The goal of this system is to use electric power not as a substitute but as a complement to the combustion engine. As Mate Rimac, CEO of Bugatti Rimac, explained, this approach challenges conventional thinking about electrification in high-performance vehicles. The electric motors, three in total, are strategically placed to enhance the Tourbillon's capabilities. The two electric motors situated on the front axle and one on the rear contribute an additional 800 horsepower to the V16 engine's output. This results in a combined total of 1,800 horsepower, providing an unparalleled driving experience. The rear motor, capable of reaching 24,000 RPM, also enables torque-vectoring, which significantly improves the car's handling dynamics. This hybrid system showcases Bugatti's innovative approach to achieving performance excellence while maintaining the emotional thrill of driving a high-revving V16. 'This Coding Trick Cuts 30% of Power Use': Data Centers Worldwide Could Be Transformed by This Shockingly Simple Energy Hack Battery System for Powerful Performance The Bugatti Tourbillon's electric motors are powered by a 24.8-kWh, 800-volt T-shaped battery pack. This battery system serves multiple functions, including delivering torque at low speeds, reducing engine lag, and regenerating energy to charge the battery. Notably, the battery pack is integrated into the car's carbon composite monocoque, using the vehicle's structure as its casing to reduce weight. The battery allows for an electric-only range of over 37 miles, demonstrating Bugatti's commitment to combining performance with efficiency. The rear powertrain unit, which includes the V16 engine, transmission, and electric motor, weighs significantly less than the engine and gearbox of the Chiron. This weight reduction contributes to the Tourbillon's expected top speed of over 276 mph, solidifying its status as a leader in the hypercar segment. 'Trash Into Power': Scientists Create Batteries From Industrial Waste to Store Green Energy and Rewrite the Future of Sustainability The Future of Hypercars: Validation and Beyond The Bugatti Tourbillon is currently in its Validation Prototype (VP) phase, indicating that it is approximately 90-95% complete. This stage involves rigorous testing to ensure that the final product meets Bugatti's exacting standards. The introduction of the Tourbillon marks a pivotal moment in Bugatti's journey, as it combines a large-displacement, naturally aspirated engine with a hybrid electric system. With its innovative design and engineering prowess, the Tourbillon is set to become a benchmark in the hypercar industry. Bugatti's commitment to pushing the boundaries of performance, coupled with its embrace of hybrid technology, is a testament to the brand's enduring legacy. As the Tourbillon moves closer to production, one cannot help but wonder how this remarkable vehicle will influence the future of high-performance automobiles. Will the Tourbillon inspire a new wave of hybrid hypercars that balance power, efficiency, and sustainability? Our author used artificial intelligence to enhance this article. Did you like it? 4.4/5 (24)
Sustainability Times
2 days ago
- Sustainability Times
'World's Deepest Cable Burial': This Monster Trencher Digs 18 Feet Beneath the Seabed to Power the Future
IN A NUTSHELL 🔧 NKT unveils the T3600, a 3,600-horsepower subsea trencher, to enhance offshore cable protection. unveils the T3600, a 3,600-horsepower subsea trencher, to enhance offshore cable protection. 🇬🇧 UK -based OSBIT designs and constructs the trencher, boosting local employment and the maritime supply chain. -based OSBIT designs and constructs the trencher, boosting local employment and the maritime supply chain. 🌊 The T3600 combines advanced technology with deep-set capabilities, ensuring minimal impact on ecosystems while securing energy supplies. 🔋 Part of a broader renewable energy expansion, the trencher supports Europe's race to connect seabed renewables to onshore grids. In the realm of modern engineering marvels, the advent of the world's most powerful subsea trencher marks a monumental shift in how we approach undersea cable protection. Denmark's recent unveiling of the T3600, a 3,600-horsepower trenching titan, underscores a commitment to safeguarding critical offshore infrastructure. As the demand for renewable energy grows, so does the need for robust systems that ensure the integrity of high-voltage cables buried beneath the ocean's depths. This ambitious project not only promises enhanced security but also bolsters local economies by engaging numerous British companies in its development. UK Supply Chain at the Core The T3600 subsea trencher is a testament to the collaboration between nations and industries. At the heart of its engineering and construction is OSBIT, a renowned UK-based firm entrusted with the design and development of the trencher and its launch-and-recovery system. By anchoring this project within the UK's maritime supply chain, NKT is reinforcing local employment opportunities and ensuring the long-term viability of UK-based contractors. 'Unlimited Geothermal Energy Is Real': Ultra-Deep Fracturing Breakthrough Promises Infinite Clean Power, Scientists Confirm This strategic move integrates NKT's installation package, reducing scheduling and interface risks for developers while solidifying the UK's role in the global renewable energy landscape. The T3600 is part of a broader investment strategy, including expansions in Portugal and Sweden, aimed at enhancing manufacturing capacity and ensuring reliable project execution. As threats to subsea cables increase, due to both natural and human factors, improved protection becomes paramount. 'China Issues Full-Scale Alert': Spinning Cannon From U.S. Startup Fires Pancake Satellites Into Orbit and Ignites Global Space Tensions Trencher Technology Comes of Age The evolution of subsea trenchers reflects the broader technological advancements in maritime engineering. From their rudimentary beginnings as simple ploughs, trenchers have evolved into sophisticated machines capable of traversing complex undersea terrains. The offshore oil boom of the late 20th century catalyzed the development of more powerful jet trenchers, while the rise of offshore wind and deep-water oil drilling in the 2000s demanded even greater precision. 'Trash Into Power': Scientists Create Batteries From Industrial Waste to Store Green Energy and Rewrite the Future of Sustainability Today, industry leaders deploy fleets of trenchers that utilize autonomous control, real-time monitoring, and low-impact burial techniques. NKT's T3600 represents the pinnacle of this technological advancement, combining high horsepower with deep-set capabilities to meet the demands of next-generation wind hubs. By ensuring minimal impact on surrounding ecosystems, the T3600 not only enhances energy supply security but also supports global biodiversity goals. Part of a Larger Build-Out The unveiling of the T3600 is not an isolated event but part of a comprehensive expansion strategy by NKT. This includes the recent renaming of a Portuguese cable plant and the construction of a significant factory expansion in Sweden. These efforts reflect the increasing demand for high-voltage export systems as Europe and other regions strive to connect offshore renewable energy sources to onshore grids. Construction of the T3600 is well underway, with British suppliers playing a crucial role. NKT anticipates that the trencher will be ready for commercial deployment within two years of the Eleonora vessel's delivery. By then, the need for efficient cable burial solutions will be greater than ever, as hundreds of miles of new offshore cables will require secure installation. If projections hold, the T3600 will pave the way for the future of subsea infrastructure. The T3600 subsea trencher marks a significant milestone in our journey toward a sustainable, interconnected future. By coupling advanced technology with strategic partnerships, NKT is setting new standards for undersea cable protection. As the world moves towards renewable energy, the importance of safeguarding this infrastructure cannot be overstated. How will innovations like the T3600 shape the future of renewable energy and global connectivity in the years to come? Our author used artificial intelligence to enhance this article. Did you like it? 4.5/5 (25)
