Stocks to buy under ₹100: Experts recommend four shares to buy today — 18 June 2025
Stocks to buy under ₹ 100: After rising for two straight sessions, the Indian stock market paused and finished lower on Tuesday. The Nifty 50 index ended 92 points lower at 24,853, the BSE Sensex finished 212 points lower at 81,583, while the Bank Nifty index lost 230 points and closed at 55,714. The Nifty Mid-cap and the Nifty Small-cap Indices underperformed the benchmark, where the Nifty Mid-cap 100 Index fell by 0.66%, while the Nifty Small-cap 100 Index corrected by 0.69%. Market breadth remained weak for the fourth consecutive day, with declining stocks outpacing advancing ones, as indicated by a BSE advance-decline ratio of 0.60.
Sectorally, it was a sea of red, except for the Nifty IT sector, which managed to stay in positive territory. The Nifty Pharma, Healthcare, Metal, and Consumer Durables indices were among the major losers. The Nifty Pharma Index took a hit, falling nearly 2% following warnings from US President Donald Trump about imminent tariffs on pharmaceutical imports.
Speaking on the outlook of the Nifty 50 today, Shiju Kuthupalakkal, Senior Manager of Technical Research at Prabhudas Lilladher, said, "The Nifty 50 index, after witnessing a significant pullback in the last two sessions, found resistance near the 25,000 zone and with profit booking seen witnessed a gradual slide to end near the 24,850 level with bias and sentiment maintained with a cautious approach as of now. As mentioned earlier, the index would have the crucial support zone near the 24,500 zones and would need a decisive move above the 25,200 level to trigger a fresh further rise in the coming days."
"The Bank Nifty index succumbed to profit booking during the session and slipped as the day progressed to close near the 55700 level, once again finding resistance near the 56000 zone, a crucial resistance zone. The index has been precariously placed and would need a decisive move above the 56000 zone to turn the bias positive. At the same time, we would need to sustain the near-term support positioned near the 55000 level to maintain the overall trend intact," Shiju Kuthupalakkal of Prabhudas Lilladher said.
Regarding intraday stocks for today, market experts — Vaishali Parekh, Vice President of Technical Research at Prabhudas Lilladher; Anshul Jain, Head of Research at Lakshmishree Investment and Securities; and Mahesh M Ojha, AVP — Research at Hensex Securities — recommended buying these three stocks: Medico Remedies, Imagicaaworld Entertainment, and Balmer Lawrie Investments.
1] Medico Remedies: Buy at ₹ 48.50, Target ₹ 53, Stop Loss ₹ 46.
2] Balmer Lawrie Investments: Buy at ₹ 80 to ₹ 81, Targets ₹ 83.50, ₹ 85, ₹ 88, ₹ 90, Stop Loss ₹ 78.
3] Imagicaaworld Entertainment: Buy at ₹ 68.40, Target ₹ 71.50, Stop Loss ₹ 67.
Disclaimer: The views and recommendations made above are those of individual analysts or broking companies and not of Mint. We advise investors to check with certified experts before making any investment decisions.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Time of India
29 minutes ago
- Time of India
How Tamil Nadu remained a global trade hub for many centuries
The economy of Tamil Nadu has shifted decisively to a high growth trajectory with the service sector contributing more than 54 % of the GDP and the manufacturing sector at around 34%. Tired of too many ads? go ad free now This figure when seen in the light of historical evidence is neither surprising nor unexpected. Industrial goods have turned up in archaeological excavations at Keeladi, Adichanallur, Kodumanal, Pattaraiperumbuddur and several other places. The megalithic sites distributed over the dry plains of Tamil Nadu have yielded beads made of carnelian and other semi-precious stones like agate, beryl and amethyst. The social organization necessary for such sophisticated industrial enterprises is reflected in the development of craft guilds and specialized merchant bodies which traded goods produced in Tamil Nadu, like steel, textiles, ceramics and metalware all across the Indian Ocean from the Red Sea to the Straits of Malacca and beyond. The history of trade and mercantile activity from the Coromandel Coast to port towns located in present day Malaysia, Indonesia and Vietnam forms the mainstay of research both by Indian and Western scholars. Inscriptions of the early medieval period in both Tamil and other languages attest to the presence of merchant bodies like the famous "nanadesi" merchants who traded in the "five hundred directions". This particular guild which is revealed in early inscriptions had a long presence and seems to have operated almost till the end of the twelfth century. Originating in Aihole in Karnataka, this merchant body worked in nagaram or trading centres where they carried out business activities which included sale of commodities which included essentials like rice, salt and cloth. Luxury goods like silk and aromatic products were dealt with by specialized merchants. Inscriptions from Kanchi Managaram from the early Chola period speak of the active role played by traders carrying out trade in luxury products. Tired of too many ads? go ad free now Farm products like arecanuts, flowers, ginger, turmeric figure prominently in medieval inscriptions. Forest products like timber, animal skins and elephant tusks are also known to have formed part of the goods involved in trade. We also have finished goods like iron ingots, gold and silver jewelry and textiles being exported from the region. The rise of the Cholas in the Kaveri region around the middle of the ninth century AD gave further fillip to the flourishing trade with South East Asia, particularly the Srivijaya empire. Chinese sources speak of trade missions that reached China from the Pandyan kingdom. The archaeological evidence from the port of Quanzhou suggests that merchants from Tamil Nadu were living in the port and an inscription of AD 1279 points to the presence of a temple at that site. Excavations have led to the discovery of a temple whose fragments are now preserved in the museum. Similarly, an seafaring vessel was recovered from Kadakkarappally, a site in Kerala which can be dated to the medieval period. Artifacts of Tamil origin have been found in South East Asia and these include textiles, religious icons, vessels made of copper and bronze and iron tools and weapons. Historians are unanimous in placing the Tamil region as a preeminent trading and commercial hub of the medieval period. In AD 1025 when Rajendra Chola I (1014-1044) launched a naval expedition against Srivijaya, it appears that mercantile interests were significantly impacted as several towns and cities in Srivijaya were destroyed. The trade in goods was sustained by the organized production of artisans in craft centres which contained weavers, carpenters, jewelers, metal workers and potters all of whom carried out their trade in fixed peasant localities termed as nadus. Merchants and traders belonging to various guilds gathered the goods produced and helped distribute them across the region and through the trans-oceanic routes to China and Southeast Asia. Marco Polo's testimony of the shipping he witnessed when he arrived at Kayalpattinam suggests that even as late as the 13th century, goods produced in the region were finding their way across the Bay of Bengal. More recently, we have seen trading communities from South India emerge as entrepreneurs and bankers in different parts of Southeast Asia particularly Malaysia and Myanmar. Falling back on historical links with regional trading communities, backed by entrepreneurial knowhow and social capital, helped build businesses that could hold their own even against discriminatory practices of colonial rulers. The author earned his PhD in Medieval History from the University of Hawaii and was a lecturer at Pondicherry University for 35 years
Time of India
29 minutes ago
- Time of India
Tamil Nadu emerging as key contributor in manufacturing drones for the armed forces, and other electronic defence systems
The Union govt referred to Operation Sindoor, India's retaliatory strike to the Pahalgam terror attack, as a milestone in the nation's journey towards technological self-reliance in military operations — in drone warfare, layered air defence, and electronic warfare. The operation significantly boosted demand for drones manufactured by indigenous companies. Projections peg the size of the Indian drone market to hit $11 billion by 2030, accounting for 12.2% of the global drone market. The ban on imported drones and the launch of the PLI scheme for drones and drone components, notified by the Ministry of Civil Aviation on Sept 30, 2021, with a total incentive of Rs 120 crore spread over three Financial Years (FYs), are laying the groundwork for India making huge strides in the drone ecosystem. Tamil Nadu is emerging as a key contributor in manufacturing drones for the armed forces, as well as building broader electronic defence systems, including UAV jammers and sophisticated payload delivery systems. The state has notable companies, both startups and veterans, such as Dhaksha, Garuda Aerospace, Zuppa Geo Navigation, ePlane company, Big Bang Boom, Data Patterns, all of which are building strategic UAVs and related technologies. Many of these firms, which had quietly developed defence-grade technologies over the years, are now seeing a surge in interest and keeping them busy with product demonstrations on field in crucial areas. Sai Pattabiram, founder and managing director of Zuppa, which is making small drones and autopilots, says they received 5X increase in order enquiries in the aftermath of Operation Sindoor. "The way drones were predominantly considered as a tool for surveillance has now changed," he said. Zuppa works closely with the ministry of defence and army units to develop systems suitable for the specific terrains and mission conditions. Garuda Aerospace, traditionally known for agricultural drones, is focussing on defence applications in recent months. "We are developing eight different drone platforms and collaborating with global players such as Lockheed Martin and Thales," said Agnishwar Jayaprakash, founder and CEO. "We have participated in emergency procurement rounds and held about 40 field demonstrations. Our focus now is to design based on ground-level operational needs and co-develop with defence forces. " Tamil Nadu is not the only drone manufacturing hub in India. The drone ecosystem is spread in peninsular India, spanning Karnataka, Telangana, and Maharashtra, which benefit from the presence of public sector giants like HAL and DRDO. However, Tamil Nadu is attempting to close the gap. Since 2022, the state has ramped up its policy and infrastructure support for the sector. Wing Commander P Madhusoodhanan, vice president of Aerospace and Defence at TIDCO, and CEO of TN UAV corporation, said, "The drone industry is at an inflection point. With military procurement expanding, we expect greater scale and sustainability." The ministry of defence is setting up four UAV testing and certification facilities near Sriperumbudur, expected to be operational by year-end. He said that these centres are focused on unmanned systems, electronic warfare and electro-optics, among the few of their kind in India and will reduce the testing cost in the state and spearhead development. TN companies' role extends beyond making drones. Dr Shivaraman Ramaswamy, CTO of Big Bang Boom Solutions, which has artificial intelligence and EW capabilities, said demand for its anti-drone systems is rising. He further said the state has a suitable environment for manufacturing defence systems, with the advantage of using electronics manufacturing service and fabrication from engineering firms. The presence of one of the country's two defence corridors, expertise in auto, aerospace and electronics manufacturing, vibrant research by educational institutions such as MIT, IIT-M, huge capacity for training drone pilots and training the trainers puts TN in a sweet spot in defence drones. Yet, challenges persist. The lack of indigenous supply chains remains a concern. Executives TOI spoke to said the union govt should hold more consultation with the companies doing actual work and urged the state govt to facilitate consultation. Many press the need for handholding by armed forces in designing and developing the technologies as more important than subsidies.
Time of India
29 minutes ago
- Time of India
Dell wants to set up AI factories in your office
Bengaluru: Dell Technologies is making the establishment of industrial-scale artificial intelligence infrastructure as easy as any other office equipment: fully assembled, ready to be bolted down and switched on. That's the idea of the firm's "AI factory" – a self-contained stack of servers, storage, networking and software that can be trundled straight into a data room and start turning proprietary data into working models within hours. "We already have about 2,000 customers running some parts of the factory," said Arunkumar Narayanan, Dell's senior vice-president for compute and networking, who sits out of the US but was in India recently. The idea arose when executives realised that most corporate AI pilots stalled not on algorithms but on plumbing: incompatible hardware, scattered datasets and a shortage of engineers who understand GPU clusters. "If data is your secret sauce you want the compute on-prem (not on cloud), yet nobody wants a two-year integration project," he argued. "So we just build the whole thing and let you wheel it in." Each factory is delivered in sizes that range from a single rack for proof-of-concept work to a warehouse-scale pod. by Taboola by Taboola Sponsored Links Sponsored Links Promoted Links Promoted Links You May Like Giao dịch vàng CFDs với sàn môi giới tin cậy IC Markets Tìm hiểu thêm Undo Every stack can be ordered with either air- or liquid-cooled accelerator trays. The latter is becoming the default as Nvidia's forthcoming Blackwell GPUs push past 1000 watts a card. "Twelve months ago nine out of ten racks we shipped were air-cooled; in two years, seven out of ten will be liquid," Narayanan said. Indian engineering lies behind much of the design. Dell's largest server team sits in Bengaluru and the mainstream two-socket racks that form the backbone of smaller factories are built at Sriperumbudur, near Chennai. While the company still assembles its flagship AI nodes in other regions, Narayanan hinted that a dedicated Indian line "is only a matter of demand". Local demand is not in doubt. On a recent tour, Narayanan met Mumbai banks seeking faster fraud detection, the National Stock Exchange looking to accelerate the world's busiest order book, and outsourcers keen to offload customer support onto generative chatbots. All wanted the same thing: cloud-like flexibility without surrendering sensitive data. That, Dell believes, is exactly what an AI factory provides. "You decide the use-case, we ship the factory, and your model starts working within hours of arriving on site."
