P0133: Oxygen Sensor Slow Response (Bank 1, Sensor 1)
What does the P0133 error code mean?
The P0133 check engine diagnostic trouble code stands for "Oxygen Sensor Slow Response (Bank 1, Sensor 1)." The presence of this code indicates that the powertrain control module is no longer receiving signals from the oxygen sensor located on bank 1, sensor 1, quickly or frequently enough for the car to run optimally. This code may also be present on certain vehicles if there is a failure on bank 1, sensor 2.
Why is this issue important?
Oxygen sensors in your car are sensors able to detect the oxygen content in the exhaust gases leaving the car's engine. These gases are read and transmitted to the car's powertrain control module. From there, the powertrain control module uses this information to regulate the amount of fuel injected into the engine before the air and fuel mixture inside the engine's cylinder is ignited by the spark plugs. Usually, the result is a check engine light and other symptoms of an engine running poorly, like rough idling.
Can I safely drive my car with this error code?
Depending on the severity of the fault, it may be possible to drive with a P0133 code. However, the code does not always indicate the severity of the issue, and you should avoid driving if possible. The delayed sensor response may cause poor fuel economy and slight performance issues. More importantly, if the air-fuel mixture becomes too rich (meaning there's too much fuel and not enough air) or too lean (meaning the opposite), it could lead to engine misfires or damage.
Common symptoms of the P0133 error code
Illuminated check engine light
Poor fuel economy
Rough idling or hesitation
Engine misfires
Slower acceleration
Black smoke from the exhaust
How is the P0133 error code diagnosed?
Use an OBD-II scanner : Retrieve the P0133 code and check for any related trouble codes.
: Retrieve the P0133 code and check for any related trouble codes. Inspect the oxygen sensor wiring : Look for damaged, corroded or loose connections to the O2 sensor.
: Look for damaged, corroded or loose connections to the O2 sensor. Test the oxygen sensor : Use a multimeter or scan tool to measure the sensor's voltage fluctuations to determine if it responds slowly.
: Use a multimeter or scan tool to measure the sensor's voltage fluctuations to determine if it responds slowly. Check for vacuum leaks : Unmetered air entering the engine can affect sensor readings and lead to the P0133 error code.
: Unmetered air entering the engine can affect sensor readings and lead to the P0133 error code. Inspect the fuel system: Issues such as a clogged fuel injector or a faulty fuel pressure regulator can potentially impact the air-fuel mixture and trigger the error code.
How is the P0133 error code repaired?
Replace the affected oxygen sensor.
Repair or replace damaged wiring and connectors associated with the O2 sensor.
Fix vacuum leaks that could be affecting sensor readings.
Clean or replace clogged fuel injectors to restore the correct fuel ratio.
Related reading
On-board diagnostics (OBD-II) and diagnostic trouble codes are part of your car's self-diagnostic system. The five-character alphanumeric code identifies the part and problem. Check out Edmunds' growing database of diagnostic trouble code information here.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Motor 1
43 minutes ago
- Motor 1
'Don't Waste Money:' Expert Shares Which Fuel Additive to Use Based on Your Car's Problem. Then He Shares How to Use It
Fuel additive fatigue is real. With dozens of brightly labeled bottles lining the aisles of AutoZone and Pep Boys stores everywhere—promising smoother rides, better mileage, or cleaner engines—picking the right one can feel like a guessing game. A viral TikTok video cuts through the noise, offering a symptom-based guide to choosing the right additive without the hype. Chris Stone (@chrisfrombeachside), vice president of Beachside Auto Parts in Daytona, Florida, says he recorded the video to help unfamiliar motorists make the best choice when selecting from the dizzying array of products promising to turn their vehicle into a fine-tuned machine. Stone's advice resonated with his audience. Hundreds shared their preferred additives, asked for additional information, and wrote comments thanking him. As of this writing, his post has been viewed 1.2 million times. How Do You Choose and Use the Right Additive? Between bold claims, cryptic acronyms, and engine diagrams that look like they belong in a textbook, it's easy to feel like you're flying blind. Instead of hype, Stone offers plain-language advice: Choose the product based on your symptoms, like hesitation, rough idle, ticking, or knocking, and you'll have a better shot at actually solving the issue. Trending Now 'I Bet You Didn't Know This:' Woman Discovers This Little-Known Perk to Driving A Subaru. Then Her Order Comes in the Mail Man Says He Bought a Nissan Frontier Because of These Standard Features. Should You Consider the Same? If your car is sluggish off the line, Stone advises trying AMSOIL P.I. Burning oil at startup? Marvel Mystery Oil still has a place in the modern garage, according to Stone. And for engines showing signs of knock or ping — especially in turbocharged vehicles — he recommends Royal Purple Max Clean to smooth out combustion. He doesn't stop at recommending products. Stone shares a useful technique for effectively using a fuel additive . He says that for most fuel system cleaners, you should wait until your tank is under a quarter full, pour the additive in, and then drive aggressively (within legal limits) to circulate the treatment effectively before refueling. This helps the cleaner come into more direct contact with injectors and combustion surfaces, increasing its effectiveness. Of course, fuel additives aren't a magic fix. If you've got a check engine light or ongoing performance issues, it's best to get a professional diagnostic. But for routine maintenance, especially with older or high-mileage vehicles, the right additive can play a useful role in keeping your engine running smoothly. When Should You Use an Additive? Most mechanics and product manufacturers recommend using a treatment every 3,000 to 5,000 miles. However, that interval can vary depending on fuel quality, engine design, and driving habits. High-mileage vehicles, cars frequently driven in stop-and-go traffic, or those using lower-quality fuel may benefit from more frequent use. Drivers who use high-grade gasoline may find they need additives less often. This doesn't necessarily mean you shouldn't use a fuel additive if you always buy premium. While many premium fuels contain detergents to keep injectors clean, dedicated fuel system cleaners tend to offer higher concentrations of active ingredients like PEA (polyetheramine), which can clean deeper into the intake valves and combustion chamber. This can be especially helpful for older engines or cars with unknown maintenance histories, where carbon buildup may already affect performance. It's also important to note that compatibility matters. Not every fuel additive is designed for every engine type. Some are explicitly formulated for gasoline engines, while others are safe for diesels or compatible with ethanol-blended fuels. Hybrids and direct injection engines may also have different needs or tolerances. Always check the label for your engine type, and avoid assuming that any additive is one-size-fits-all. The wrong product can reduce effectiveness at best and cause damage at worst. Another point of confusion for many DIY car owners is whether it's okay to mix multiple additives in the same tank. The short answer is no, unless the manufacturer explicitly allows it. Most companies advise using just one additive per treatment cycle to avoid unintended chemical interactions or dilution of key ingredients. It's best to wait until your tank is nearly empty, add the recommended dose, and then refill, following label instructions closely to ensure safe and effective results. 'There's a lot of marketing out there, but nobody knows exactly what's good for what,' Stone told Motor1 over the phone. 'They all claim the same things, but they're all made differently and they have different values for different drivers.' More From Motor1 Here's Why Your Fuel Mixture Is Just as Important as Your Oil Mixture It's Incredible How Badly Low-Quality Fuel Can Damage Your Engine 'That's Obviously a Villain Car:' Man Spots Honda Fit in Parking Lot. Then He Notices the Back 'Making It Personal:' Man Buys 'Lemon' Ford F-150 From Used Car Dealership. Then He Decides to Get a Custom Wrap and Warn Buyers Share this Story Facebook X LinkedIn Flipboard Reddit WhatsApp E-Mail Got a tip for us? Email: tips@ Join the conversation ( )
Bloomberg
an hour ago
- Bloomberg
Continental's Split Shows How Germany's Business Model Is Shifting
Continental AG intends to become the latest German manufacturing stalwart to dismantle itself, highlighting the pressure to become more agile to weather structural issues at home and respond to mounting competition abroad. Tracing its roots to producing rubber hoof buffers for horses in the late 19th century, the Hanover-based company plans to split into three: the core tire business, rubber components and auto parts. The moves, which Continental will pitch to investors on Tuesday, would unwind decades of diversification and reflect Germany's shifting business model.
Motor 1
an hour ago
- Motor 1
'Do Not Drive:' Ford Issues a Recall for Super Duty Trucks With Bad Brake Pedals
Ford is warning 2025 Super Duty owners not to drive their pickups. They might have a brake pedal assembly that lacks a retaining spring that's designed to secure the brake booster pushrod to the brake pedal, which can result in the loss of braking power. The recall affects just 2,345 2025 Ford Super Duty trucks, ranging from the F-250 to the F-550. The automaker began investigating the problem in late May after team members at the Kentucky Truck Plant notified Ford's Critical Concern Review Group (CCRG) of a missing brake pedal retaining spring on a 2025 F-350. Photo by: Ford After that, Ford's CCRG reviewed a May 5 report of a service technician having no braking force during a pre-delivery inspection of a Super Duty, with the brake pedal 'swinging freely,' according to the Safety Recall Report . Ford then received a warranty report in early June of another F-350 with a missing spring that a tech found during its inspection. The CCRG, through its investigation, learned that an operator new to the job and still in training had built both trucks with the missing retaining spring. It also found that the camera system designed to monitor production was down during certain periods, so Ford is also recalling those vehicles without sufficient visual evidence that they were correctly built. Ford says it has already begun notifying affected owners. The automaker says it'll instruct them to work with their dealer to complete the inspection, as the automaker does not want owners driving their vehicles. Here Are More Recalls You Should Know: 'The Pedal [Could] Shift Out of Position:' Honda Recalls a Quarter-Million Cars Over Faulty Brake Pedals Ford Issues Do Not Drive Order for Exactly Three Broncos Get the best news, reviews, columns, and more delivered straight to your inbox, daily. back Sign up For more information, read our Privacy Policy and Terms of Use . Source: National Highway Traffic Safety Administration Share this Story Facebook X LinkedIn Flipboard Reddit WhatsApp E-Mail Got a tip for us? Email: tips@ Join the conversation ( )
