Asus' ROG Falchion Ace HFX Brings a Fresh Take to Hall Effect Keyboards
Every gaming keyboard manufacturer seems to be jumping on the Hall effect bandwagon, and why wouldn't they? The keyboard technology has been proven in both esports arenas and home office setups worldwide and offers countless advantages over standard mechanical keyboards, with no real performance compromises.
Hall effect keyboards have also arrived as countless other technologies enter the keyboard space: Everything from gasket-mounting to touchpads is now in mainstream keyboards. That also means I regularly see new products, mechanical and Hall effect, with features I've never even considered before. Case in point, the Asus ROG Falchion Ace HFX, a small keyboard with a large name and a lot of unusual features.
This $200 wired-only keyboard has Hall effect switches, an 8,000-Hz polling rate, multidevice connectivity with two USB-C ports, and a programmable touchpad on the back edge. Not to mention countless on-keyboard controls and a flipable lever to enable or disable the rapid trigger feature found on most Hall effect keyboards. While it does have some strange design decisions, it has a lot of really clever ones too. Unique Switches
Photograph: Henri Robbins Photograph: Henri Robbins
Photograph: Henri Robbins
The Falchion has one of the deepest typing sounds compared to other Hall effect keyboards. This is likely a combination of the keyboard's unique HFX magnetic switches, one of the few I've tested that aren't made by Gateron, and the sound dampening inside. It consists of multiple layers of foam, Poron, and silicone, and a sheet of small rubber domes.
The switches feel incredibly smooth, even when pressed slowly, with a consistent feel throughout the entire keypress. They use a polycarbonate top housing, a POM stem, and a POM bottom housing, contributing to the deeper typing sound and ensuring smoothness across the entire keystroke. Unlike most Hall effect switches, the HFX doesn't have a hole in the center, instead, it moves the magnet to the front, where the metal contact leaf would typically be on a mechanical switch. This makes the Falchion incompatible with standard Hall effect switches, but likely improves the sound profile as well: Open-bottom switches tend to have a more hollow typing sound, which can be heard on competitors.
The springs are weighted to 55 grams of total force, which is 5 grams lighter than the Gateron Nebula dual-rail switches used by Keychron, and 10 grams lighter than the standard Cherry MX Red. There aren't any other switches available for this keyboard, but because Hall effect switches are contactless, the existing switches can be removed without any desoldering or extensive disassembly.
I didn't find myself wanting to change the switches, though—they have a poppy and deep sound that's incredibly crisp, and they feel responsive and smooth, especially with rapid trigger enabled. My largest issue with the typing experience was the keycaps. They have a rough texture that, while grippy, felt noticeably coarse and unpleasant when typing. It comes down to preference, but I found them less enjoyable than smooth or lightly textured keycaps.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Time Business News
3 hours ago
- Time Business News
Choosing the Right Ultrasonic Thickness Gauge: U.S. Market Guide 2025
As industrial safety standards and inspection demands continue to evolve in the United States, the importance of accurate, non-destructive testing (NDT) tools has never been higher. Among them, the ultrasonic thickness gauge is one of the most relied-upon devices for evaluating wall thickness, detecting corrosion, and ensuring the structural integrity of assets in industries such as oil and gas, infrastructure, marine, and manufacturing. If you're in the market for a reliable device in 2025, this guide will help you choose the right ultrasonic thickness gauge for your needs, with a spotlight on the value and versatility of the cygnus Ultrasonic Thickness Gauge—a leading choice for professionals across the U.S. Across the U.S., critical infrastructure continues to age. From bridges and oil pipelines to manufacturing plants and offshore rigs, accurate wall thickness measurements are essential for: Preventive maintenance Regulatory compliance (OSHA, DOT, API, ASME) Asset lifespan management Operational safety In 2025, inspectors and engineers demand more from their tools: higher accuracy, better data logging, and usability in extreme environments. Choosing the right ultrasonic thickness gauge isn't just about getting a reading—it's about integrating smarter, faster inspection methods into your workflow. When evaluating your options for 2025, consider the following must-have features: The ability to measure material thickness without removing coatings or paint is vital for in-service inspections. Look for gauges that support true through-coating functionality to save time and reduce surface prep. Multi-echo systems improve measurement reliability, especially on corroded, rough, or coated surfaces. This is a standard feature in advanced models like the cygnus Ultrasonic Thickness Gauge. Ensure the device can measure a variety of materials—steel, aluminum, plastics, composites—by offering adjustable or preset sound velocity options. For U.S. field inspectors working in everything from sub-zero environments in Alaska to humid Gulf refineries, ruggedness is non-negotiable. Choose gauges that are shockproof, waterproof, and drop-resistant. 2025 demands digital inspection records. Look for models with internal memory, USB/Bluetooth data transfer, and software compatibility for streamlined reporting. A clear, backlit display with intuitive menu navigation improves speed and accuracy in the field. Large screens and glove-friendly buttons are a plus for job site use. Modern gauges should provide long battery life with USB-C charging or swappable batteries for all-day use in the field. Needs: ATEX-rated, intrinsically safe models with corrosion detection on pipelines and pressure vessels. Needs: Through-coating measurements, especially on hulls and ballast tanks. Needs: Steel structure and bridge inspections where material access is limited to one side. Needs: Tube thickness measurements in boilers, condensers, and heat exchangers. In each of these sectors, durability, precision, and ease of use are paramount—and are key reasons why many U.S. professionals choose Cygnus gauges. One of the most trusted and widely used thickness gauges in the U.S. is the cygnus Ultrasonic Thickness Gauge. Known for its multi-echo technology, this device delivers consistent and accurate readings even on heavily corroded or painted surfaces. With intuitive controls, robust field-ready construction, and a proven track record in harsh environments, it's a go-to tool for professionals who require performance and reliability. Whether you're inspecting a bridge, pipeline, or offshore platform, cygnus gauges provide the precision you need without slowing down your inspection schedule. Cygnus Instruments, as a manufacturer and supplier, has become a recognized name in ultrasonic testing worldwide—and especially in the United States. Their focus on rugged design, user-friendly features, and technological innovation makes them a preferred choice for asset integrity teams, maintenance engineers, and third-party inspectors. Their instruments are trusted by organizations that include government infrastructure teams, energy companies, and U.S. Navy contractors—proof of their reliability and wide application in the American market. As 2025 continues to push the boundaries of safety, regulation, and industrial performance, investing in the right ultrasonic thickness gauge is more than just a procurement decision—it's a long-term asset protection strategy. The cygnus Ultrasonic Thickness Gauge is one of the most complete and dependable tools available in the U.S. market. When sourced from Cygnus Instruments as a manufacturer and supplier, you're not just buying a device—you're gaining a trusted partner in precision inspection. TIME BUSINESS NEWS
Yahoo
12 hours ago
- Yahoo
Tigo Energy and BayWa r.e. Empower High-Wattage C&I Solar in Thailand
At annual ASEAN Sustainable Energy Week 2025, Tigo and BayWa r.e. collaborate on optimization, monitoring, and rapid shutdown solutions for C&I solar in Thailand. CAMPBELL, Calif., June 22, 2025--(BUSINESS WIRE)--Tigo Energy, Inc. (NASDAQ: TYGO) ("Tigo" or "Company"), a leading provider of intelligent solar and energy software solutions, today announced that the Company will share a trade show booth with BayWa r.e. at the annual ASEAN Sustainable Energy Week 2025, from July 2-4, at the QSNCC in Bangkok, Thailand. At the show, Tigo will focus on supporting Commercial and Industrial (C&I) solar installers and engineering, procurement, and construction specialists (EPCs) as enforcement of new rapid shutdown requirements begins, deploying high-wattage modules in high-irradiance regions, and ensuring Total Quality Solar (TQS) through Tigo service programs. For solar projects in hot, humid, and high-irradiance (>1000W/m2) regions like Southeast Asia, the Tigo TS4-X family of MLPE devices provides the latest in optimization, monitoring, and safety for solar installers deploying high-wattage modules, including supporting the increased backside gains of modern bifacial modules. The TS4-X product line gives installers more freedom to deploy the modules that deliver the power and performance for their customer deployments, reduce labor costs with a no-bolt design and no need for additional ground wiring, and contribute to improving Levelized Cost Of Energy (LCOE) in the large-scale solar sector. Tigo MLPE devices pair with an industry-leading list of third-party solar inverters to deliver design and installation flexibility for solar installers and EPCs. "Thailand's rooftop solar market is growing rapidly and so is the demand for safer, smarter systems," said Junrhey Castro, managing director at BayWa r.e. Solar Systems. "As a regional distributor, we're committed to supporting this growth with reliable solutions that protect both the performance and investment of our customers. Having Tigo in our product portfolio reflects our focus on quality and innovation for solar professionals across Thailand and Southeast Asia." In Thailand, Tigo will also invite installers to enroll directly in the Tigo Green Glove service program at the BayWa r.e. booth. The Green Glove service program is a premium support experience for installers of commercial and industrial (C&I) systems that enhances the installer experience and drives quality across the solar value chain with a process that includes a set of formalized support engagements for Tigo C&I installers before, during, and after the installation. "Strong collaboration between global companies like BayWa r.e. and Tigo is part of what makes the solar ecosystem work for more installers and EPCs around the world," said Jing Tian, chief growth and revenue officer at Tigo Energy. "As with many of the pro-solar nations in Asia, we believe that products like the TS4-X and programs like Green Glove make great strides in further driving LCOE down, and Total Quality Solar up, respectively. In regions with higher-than-normal irradiance values in particular, these dynamics benefit the entire industry, from equipment manufacturer to installer, and on to the operators and asset owners." ASEAN Sustainable Energy Week 2025 attendees are invited to visit BayWa r.e. and Tigo at booth F11 from July 2-4, at the QSNCC in Bangkok, Thailand. To book an appointment with a Tigo specialist at the show, please register your interest here. About Tigo Energy Founded in 2007, Tigo Energy, Inc. (NASDAQ: TYGO) is a worldwide leader in the development and provider of smart hardware and software solutions that enhance safety, increase energy yield, and lower operating costs of residential, commercial, and utility-scale solar systems. Tigo combines its Flex MLPE (Module Level Power Electronics) and solar optimizer technology with intelligent, cloud-based software capabilities for advanced energy monitoring and control. Tigo MLPE products maximize performance, enable real-time energy monitoring, and provide code-required rapid shutdown at the module level. The company also develops and provides products such as inverters and battery storage systems for the residential solar-plus-storage market. For more information, please visit View source version on Contacts Technica Communications for Tigo EnergyLuis de LeonEmail: tigoenergy@
WIRED
21 hours ago
- WIRED
I Surprisingly Can't Get Enough of the Space-Age Looks of This Asus Gaming Keyboard
A lot of mechanical keyboards struggle with aesthetics. It's hard to get right! If the styling is overdone, you might inhibit functionality or just have too much going on visually. If you stick to the basics, you might end up with a bland keyboard. Whichever way you go, there's still a chance you'll get it wrong and have something that doesn't look good. But there's been an influx of really well-designed keyboards of late: Keychron's K2 HE Special Edition is a great example, along with the Mchose GX87 Ultra, not to mention the countless high-end custom keyboard kits available today. With most of these keyboards, keycaps take a backseat—even if they look good, they're usually fairly standard and minimal. Asus takes the opposite approach with the ROG Azoth X: A simple white case, but colorful and stylized keycaps. It's not the most conventional design, but they look really good and manage to liven up a desk without taking over your setup. This keyboard manages to look good without sacrificing substance—the Azoth X has 2.4 GHz and Bluetooth connectivity, 1,000-Hz polling, and an internal assembly that makes it both fun to type on and easy to modify. It's available in white with either click or linear NX switches, and includes a silicone wrist rest. All that costs a pretty penny, though, at $300. Deep and Snappy Typing Photograph: Henri Robbins This keyboard is most comparable to Razer's BlackWidow V4 75% in typing experience. Both use a metal top case and a plastic bottom case with a gasket mount system and a plastic plate. The stiffness is similar, as are the sound profiles. The biggest difference is the switch options: Razer's 75% keyboard is only available with tactile switches, while Asus offers linear and clicky switches. The unit I received came with Asus's Snow linear switches. These are a fairly light linear switch with a deeper typing sound and a consistent smoothness throughout the entire keypress. They aren't the smoothest switches I've tested, but the friction felt when typing is both minimal and consistent, resulting in a typing experience that's still enjoyable. These switches also have minimal stem wobble, meaning keypresses feel stable and confident when typing. They require less force than a Cherry MX Red switch, requiring 53 grams of force to fully bottom out compared to the MX Red's 60 grams. This difference is noticeable and makes the switches feel more responsive without as much risk of mis-inputs compared to a truly lightweight (sub-50g) spring. The gasket-mounting system that holds the keyboard in place feels like a mix between a gasket mount and an o-ring mount, since the rubber gaskets are pressed tightly into the inside of the case. This means the typing feel is consistent across the entire keyboard, and feels more connected to the case compared to a standard foam gasket. It still has some of the bounce and softness expected from a gasket mount, but it is less than many comparable keyboards. The stabilizers in the Azoth X are standard plate-mounted, lubed from the factory. While plate-mount stabilizers are typically going to feel less stable than PCB-mount, the ones used here still feel good and have no rattle out of the box. Space-Age Aesthetics Photograph: Henri Robbins There are a lot of things I like about the design. The keycaps are slightly flatter than the average keycap and have a two-piece assembly with a transparent back for RGB diffusion. The case has a sleek and angular design that looks stylish and space-age without taking up a lot of room.
